More of interest from Dave L
Quote: "There are so many things this solves. The TPU for one, and the frequency set that can be used to set it up to self sustain."
"Quadrature,
Wilbert Smith was obsessed with this type of field and thought it was the only one. The three forces we have access to on earth are electric magnetic and time or tempic.
To make the nodes spin on a circle we are tapping into the tempic field or the actual time clock of matter as it is strobed.
If we view the background field as updating itself 333000 times a second, then if we make a box on the correct length as the background field draws it each time it will rotate a little. It will still be a square with 4 nodes, but the lines between the node will be turning a little at 333000 velocity angles.
If we synchronize our caliper distance to 333000 length the nodes will freeze into a triangle pattern, and that is actually the special case, where we can then study them better for modification. When they spin however, we must know what we are doing because adding another field to them it will immediately go into a spin and we will not be able to scan for the individual nodes anymore.
Thus to construct a doughnut, we will be using the 1x diameter from the 2nd column of diameters.
Then to add spin on the spin, we take 1/2 that length and apply it to one side of the circle and it will attach to the circle and create our doughnut field with intense compression at the center of the form in one orientation.
You cannot probe a spinning field for a node, you can only probe it for a center position and the outer sphere.
If we lived in a crystaline world, quadrature might not be the base form of the way energy works. Our world may be unique in this way, as we do not grow as crystals grow, we use electrical fields, and shells of electrons to organize our matter, and form into biological bodies.
So the reason to have the background field separated into 2x jumps, is to create the base on the diameter of the circles so they will form self sustaining fields at 90 degree angles with square root of 2 couplings, forming spherical electron shells that conform to our electrical systems on earth.
Note also however when we fracture these field in base 10 format what goes inwards is still operating on powers of 10, and while we cannot know for sure how this effects atoms exactly, I do know quadrature division looking inwards is quite a mess.

In fracturing you have to set your 1x, and then you can go inwards with all the numbers to the right of the decimal. When in multiplicity you go outwards with whole numbers, and the result is opposite.
x multiplied by 9, is different then x divided by 9. And if you remember that the 1 must be a whole fractal then you can grasp the difference.
x multiplied by 9 = the same fractal length made longer with the same segment lengths.
x divided by nine results in a new segment length operating on the 1x segment length, because octaves do not form at 1/9x, octaves of the same segment lengths form at 8x, 12x, etc. The 150 is an exception, at 5x for 30 mm and at 3x for 50 mm, and it is the crossing point of two different segment lengths.

I realize it may appear I am jumping all over the place, and it may be hard to grasp it all at once.
Just keep in mind that my goal is to provide electricity from the background field, and this limits the rules, and makes the path more one sided.
The background field however does not care, and from its crystaline structure form that is naturally triangular, and HEX formed, it can do many other things then operating only in quadrature mode as squares and cubes.
Using time modulation, you can extract 12 sided polygons as well and all the laws of how you operate on it would change.

Right now I am approaching a way to set up an electric field on a spherical transformer, that will become a power supply when programmed correctly. Three coil systems aligned all at 90 degrees to one another is the density sphere format that I saw early on but did not know how to set up the three frequencies on it to make an electron shell that will rotate self sustain. Now I have one configuration that will work and the 3 frequencies to use to program it to start up.
The problem with current electronics people is they do not see the electric field in a 3D rotation as it works down a wire with AC current on it. There are three forces that cross the wire at three different time in the cycle, because the rotation of the field is spherical with quadrature alignment between the three fields.
If you feed a scalar cancelling coil on the sphere, that coil will generate fields that converge again on the other two 90 degree coils, and if wired in series correct will create a new electrical field that can power things. All the back EMF that would go back to load the generator will be cancelled by the scalar coil and not flow back into the power line.
However if we set up the three fields inside the core of the spherical transformer, it can become the generator itself.
I did this by accident one time and had a light working on a toroidal core, but the field was way too large to contain.
Now we have all the dimensions that we can couple into at any size to play with and the EM frequencies that will couple to them, as well as the three frequencies used to start it working.
The beauty of this is that when applied to iron medium it does not cause a headache! That alone is worth playing with it.

There are so many things this solves. The TPU for one, and the frequency set that can be used to set it up to self sustain. The reason for one scalar coil loop and three wrapped around it at 90 degrees, it is now no problem to cipher the necessary frequencies to get it up and running.
Any two coil systems that have 90 degree alignment, can be used to establish an SSF. This was somthing that we noticed early on about all the OU devices that worked. Too many theories as to why, and too few successful experiments to even get it to work.
Now I can give you the frequencies, that will work.
TPU had to have specific diameter coils, and he had only found two of them that worked. I can give you a lot more, but if you want 60 hz output, that will likely narrow it down a bit.
As you can see this latest work is only pointed at all the electric field devices I have studied in the past. Consciousness does not have to operate only on that level.
There are other ways to build atoms, but I have not taken those paths as of yet.

So we now have to add the sqrt (2) to the list of self sustaining ratios, with the understanding that it only works if the two fields are started at 90 degrees to one another. Of if the electrical circuit is fully loaded with an inductive load where the fields will split off EM resonance and have both frequencies present on it.
Wilbert Smith, and many other, indicated that to get it working one must have at least 100 watt load. When I did it with the house mains, I had the 100 watt load on the toroidal transformer, and got it to happen.
Now we realize that if we simply use two coils geometrically at 90 degrees we likely do not need the load present to start the field up. Understanding why it works, is the key to engineering it better.
You cannot imagine how many of the questions I have had over the years that this has solved!
It opens all kinds of doors to get pass all the tinkering and guess work, and I have only extracted one type of atom field. People could take off in all kinds of directions with this understanding now and go into 3x and 12x and hex or 6x sided forms as well and all the math will work if you use the correct geometry to come up with the formulas.
My formulas look like they came right out of electronics, but without the geometry you would have no concept of why they work. It was when I attempted to simplify them they started to look like stuff I recognized using things like 4 pi.
So again, connecting vibration with electricity is what this is all about right now for me. All the outer shells of the atoms use this form of energy, on planet earth. They are all electric and magnetic, as secondary forces, riding over the tempic field that is the prime field.
 In car engines we do not need the EM field to extract the power from the T field directly, and couple it into the engine, In this case we came up with other formulas like the 89 / 50, which does not generate any sort of electricity that I can tell.
JC normally form into hex format if not sepcifically programmed to go into quadrature mode.
I have yet to draw up how to make a JC go into quadrature mode on all the tube, although I have touched on it already with the NMR values that are all in that form. Now we can set up quad field on three levels that will self sustain, and there is another avenue to take on this.
Its is like the branches of a tree now, because I can start at the Source field end and then work towards the one specific branch to accomplish many different things.

With the mind now working in the other direction from Source field towards the specific end result desired, it is far easier to contemplate and solve.
We can apply it to Russells heat generator as well, as he did not have SSF in that. He made geometric jumps of 1/2 diameter. If he had made diameter hops of sqrt[2], it could have become it's own power source as well if coupled into the background field correctly. he coupled to the power grid instead and made hops down of 2x or 1/2x, and this do not form SSF field unless you set up another one between them at 90 degrees.
With a little thought, we can do all of the earth based powering stuff now, it only has to be built and perfected.

Sqrt (2) ratio fields coupled at 90 degrees solves all the powering needs of planet earth, once you understand the 1/9 and 1/18x relationships that can be set up to operate inside of the SSF to pull in the energy then turn it back outwards in quad form.
Dave L"
