With such questions as the ammeter readings we just turn in circles.
Technically speaking those toroids, if standard and if driven in a standard way should not have shown such high or even no amperage readings in the way he took them because toroids keep the field inwards. This is why recently I postulated that the field is not coming from the toroid but from the center of the toroid that harbors some other type of coiling or mechanism.
We know that SM never did anything for nothing. We know that there is a toroid in the FTPU and we cannot see under the toroid. We know there is a toroid on the OTPU and we never were able to see behind it (it was placed vertically). We know there is a toroid in the MTPU and again we never saw under it and we know there are two toroids in the LTPU and again there is a nice but small black box under them.
So we know SM never does anything for nothing, so there has to be a reason for everything in his videos, so there has to be a reason why we never see under the toroids. A while ago, I had put up a diagrams of a mechanism that could be under the toroids and also this same mechanism could exhibit the gyro shaking effect.
Take a speaker and connect it to your pulse generator and then hold the speaker in your hands and see if it does a gyro effect and see up to what frequency you can feel the effect. This will give you at least some parameters.
So imagine that if in the LTPU was dishing out 800 something volts at 1 amp, the only evident control circuitry would be in that black box and this is what we all tend to think. All the other TPUs did not have that much circuitry either. Maybe the OTPU since we can see the circuit board but there are not that many components on it. But again look at the LTPU with such a small box for controls and compare that to the mountain of control circuits in the latest Kapanadze device that is producing less then half of the LTPU output.
There has to be some control. SM says there is no mass circuitry because it is the knowledge of the coils and that wire is very important. But it is always the knowledge of the coils and it is always that wire is important so that statement does not mean anything more then if I was a hang man and said "knowledge of the knots and rope choice is very important". Then you have to interpret what "no mass circuitry" means. So, when does circuitry become mass circuitry? Don't know.
To think that the LTPU is working and producing that much juice and there is not one place to put enough circuitry to control such an event is just dumbfounding. So how did he generate his feed power, his switching system of 5000 hertz and some 800 watts, and how did he re-combine the outputs to produce so much juice.
When SM gave the working 6TPU to the other guy, the other said "slight noise and vibration" and SM practically pulled the unit out of the guys hands as if to say "Enough already, you shmuck, why are you mentioning NOISE". So what noise did that guy hear loud enough to mention before he mentioned vibration?
Anyways, we can go on and on and on and it will never end and one day, even if one of us does make a working TPU, we will never know if it follows SMs TPU design or if it leaves SMs technology in the dust. Well we never know. We just got a new look at a Tariels Kapanadze device and it may give more clues, so maybe a new SM video is out there somewhere that may resurface and do the same.
wattsup
PS: Maybe one last thing that has been pulling at me for several days now. Go back to all that you have learned of OU, from the first things you saw till today, which system in your eyes seems to be the most promising and would be easy to work out. Well we know SM's devices are not easy, or Kapanadze or Romero or there are so many other. But in my eyes, the one that exemplified the best the rotating magnetic field effect is the one and only ........................................... Rodin Coil. I am always amazed at such a simple device that is wound on a donut shape that can keep a magnet turning and turning at high speed with the simplest of pulsing schemes. So what I am thinking these days is why wind a Rodin on a dumb plastic donut shape. Why not try to take an alternator stator coil which is like a donut, and, wind a Rodin Coil over it and pulse it to see what happens. Seems to me all the stator wants to see is a rotating field and that is just what you get with a Rodin Coil. No duals, no quads, no 3-phasing required. Then, what if the STPU and 6TPU used this same idea and the outer winds follow in a way the Rodin method of continuous turns of the same wire. Or even wind a pick-up coil over the Rodin Coil. Has anyone tried that? Don't think so because all the videos I have seen just show the Rodin Coil and how nifty it is turning a ball magnet.
---------------------------
|