OverUnity Research

General - Free Energy Related => Miscellaneous Discussions => Topic started by: Tommey Reed on 2014.06.28, 00:57:35

Title: Tommey Reed's Simple Vapor Carburetor
Post by: Tommey Reed on 2014.06.28, 00:57:35

This simple vapor carburetor will run any engine when you have carburetor problems and can't buy a new one.

I have built these for years and it's so simple a cave mane can do it.

Enjoy this video. :o

https://www.youtube.com/watch?v=1ZUnbHrXs3I

Tom

Title: Re: Tommey Reed's Simple Vapor Carburetor
Post by: Centraflow on 2014.06.28, 10:18:21
Quote from: Tommey Reed on 2014.06.28, 00:57:35
This simple vapor carburetor will run any engine when you have carburetor problems and can't buy a new one.

I have built these for years and it's so simple a cave mane can do it.

Enjoy this video. :o

https://www.youtube.com/watch?v=1ZUnbHrXs3I

Tom



Hi Tom, yep that's the way to do it.

Here's a little extra for those that reprocess cooking oils and other waste oils (don't do it) ;D  I think you know where I'm going with that >:-) and you can upgrade the octane as well when done properly :o

thanks Tom

regards

Mike 8)
Title: Re: Tommey Reed's Simple Vapor Carburetor
Post by: Chet K on 2014.06.28, 10:45:24
Tom
Have you run any comparisons 
A quart thru the carburetor under load and a quart thru the gassifyer under load?

?
thx for sharing.

Chet
Title: Re: Tommey Reed's Simple Vapor Carburetor
Post by: Tommey Reed on 2014.06.28, 12:17:42
Hi Chet,

Yes, you do get a 30% increase of output, but with all the chemicals added to gasoline today you would need to keep the temperature around 120deg using the exhaust.

Tom...

Title: Re: Tommey Reed's Simple Vapor Carburetor
Post by: Tommey Reed on 2014.06.29, 21:08:03
This is a test run on a old 25hp Honda engine using my simple vapor carburator.

https://www.youtube.com/watch?v=edXvkkQshE4 (https://www.youtube.com/watch?v=edXvkkQshE4)

Tom.
Title: Re: Tommey Reed's Simple Vapor Carburetor
Post by: Leedskalnin on 2014.06.30, 02:40:07
Hi Tommy!

Thanks for the video, your design is the simplest one  O0 but for more applicable use on car engines I recommend below video:

https://www.youtube.com/watch?v=17xVBQ_U2yw

also the same above video on vimeo: http://vimeo.com/53415056

For those who have not access to youtube or vimeo download it here:

http://www.mediafire.com/download/q897d40h0yordyl/The_Complete_High_Mileage_Fuel_Vapor_System_for_the_Internal_Combustion_Engine_Part_V_The_Gift_YouTube(1).rar

I have seen this video about two years ago it has been reuploaded by others, as I remember the originator of the video disappeared after first upload.

Leed
Title: Re: Tommey Reed's Simple Vapor Carburetor
Post by: Tommey Reed on 2014.06.30, 05:55:08
Hello,

I seen the video and understand that he wanted to make a custom parts to sell.

The problem with a vapor carburetor is you have to adjust the fuel & air mixture under different loads, that won't work as efficient vapor carb.

Tom Ogle have to adjust his system when He got 200+MPG.

http://www.rexresearch.com/ogle/1ogle.htm (http://www.rexresearch.com/ogle/1ogle.htm)


Thanks for the video.