Colman_Gillespie Device

[Chet K]

There are several Movies from Wesley on this device at his you tube

# 10 is here
http://www.youtube.com/watch?v=w2nGASfHso0&feature=youtu.be

and also there is this translation by Wesley of another mans work and his call for help in understanding an anomoly which seems impossible

http://www.youtube.com/watch?v=-kO8aMm9uW8

thx for looking
Chet
PS
I started a seperate thread for the Copper anomoly here

http://www.overunityresearch.com/index.php?topic=2200.msg33378;topicseen#msg33378

[ion]

The "accidental" transmutation of copper to a magnetic copper isotope or magnetic nickel isotope is very big if real.

Curious that more people on this forum are not looking closely at this or commenting positively or negatively.

My comments:

Nickel is weakly magnetic, yet the video shows fairly mild attraction.

Does anyone know if isotopes of copper are mildly magnetic or at least as strong as shown in the video?

What energy would be released in a conversion from copper to nickel?

Is it possible that some cheap copper / nickel plated steel speaker wire was accidentally spliced onto the roll of copper wire to fill out the roll length requirement?

[Centraflow]

I have posted on the other thread, I have also what looks like the same speaker wire as him and mine is attracted to a magnet. It has been used in HV DBD work though, and maybe because of that "70kv DDBD glow discharge"

Mike

[Chet K]

Wesley
has updated here
http://www.energeticforum.com/renewable-energy/13901-colman-beta-decay-new-energy-source-2.html#post252998

stivep  ,

Quote
""
EVERYTHING BELOW IS DONE FOR FREE ENERGY experiments:


Part #1       https://www.youtube.com/watch?v=k2PJVIkyW5Y

SPECTROSCOPY/ NUCLEAR/ PART#2 :X-ray https://www.youtube.com/watch?v=CQ3gPFfgDp8


All one need to know to understand science of radiation in respect to Colman FE, Andrea Rossi LENR, and mechanisms of nature. DIY is always easier for me when help comes from scientific community in easy to swallow form.That is what I provide to my Colleagues in science and that is what they provides for me:


parts of video in time frame:


- time 00:00 easy introduction to identification of periodic table elements in anything you have around.Explanation of device.
How much gold is in your ring,(how much gold is in GOLD?

- time 03:37 Basic theory and how the measurement is created.( easy, but not for idiots, -directed to strongly motivated viewers)


- time 09:30 How big specimen can I measure? ( solids, liquids, powders)


- time 10:51 Calibration( that is to be applied to any spectroscopy- alpha, beta , gamma, x-ray) by comparing to calibrating fixture -( just a piece of material that has known elements of known values)


- time 17:50 Can we place the sample now? (.......granules of Gold in plastic bag)


- time from 20:57 to 23:48 It does not always pay to educate someone you trying to convince to give it you. I almost lost it...........gushhhhhh but............... he is a good man..........


- time 24:13 My first measurements and crushes.... nice chunk of gold under scrutiny,


-34:30 some reflections ......


Wesley ""

[Chet K]

Wesley has shared some updates and comments on his replication  ,  there were also unrelated comments which I removed [Akula stuff]

Wesley Quote

It doesn't mean  that I did not get results  with Colman, nor that I did not finish Colman.
It means that I  published my last video in three languages and that video very much explains where I'm and what I  expect from you guys.
https://www.youtube.com/watch?v=l-Cvm_0XEjg
I'm moving forward, The phenomena described  by Colman "works" as stated in his patent.
So far  I have been able to collect significantly  large amount of laboratory equipment dedicated to this scientific investigation.


for some that will not be too  ignorant ( "lacking knowledge or information," )  or get bored with this  PM:
- EDXRF SEIKO SEA4120  for material analysis before and after experiment- measuring transmutation level of the compound.( also apliable to    Russian Yoke ferrite) If there is any decay than it must affect  periodic table  components in within Colman or Yoke. However, if the change is in form of Isotopic reaction than
EDXRF may not be able to show the changes. If new periodic table element is created that it will show its presence.

-HPGe ORTEC with Liquid Notrogen Dewar- this one is Rolls Royce of  Radioactive  Elements Spectroscopy  .+ software(  in process of  assembly)

-HPGe Canberra,   ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,  .+ software (  in process of  assembly)

-DIGIBASE with Scintillating Detector + software (working)

-INSPECTOR-1000, CANBERRA - portable , scintillation detector based on  lanthanum bromide enhanced resolution scintillator probe+ NEUTRON PROBE+ software, (needs calibration and software setup)

-DETECTIVE EX ORTEC with mechanical cooler portable- this one is Rolls Royce of  Radioactive  Elements Spectroscopy + NEUTRON PROBE

-Ranger, Quantrad Sensor  with scintillation detector based on  (working)

-model#2007 base Canberra with Teledyne NaI(TI) Detector ST-82-1/B,wit beryllium window  good for low energy nuclides, ( did not even try it yet.) No need as  other detectors do the job as well. However it is good to see X-rays from the  specimen.

-Jeol JSM-U3 Scanning Electron Microscope ( around 2300lbs) (still problem with vacuum assembly)

-Veeco V-300 Classic High Vacuum Lab System. Bell Jar - a piece of laboratory equipment used to contain vacuum. It is similar in shape to a bell,

-number of X-ray machines ( in process of renovation)

-2200lbs lead shield with hydraulic lifter.

-PERKIN  ORTEC DART GAMMA-RAY SPECTROMETER SOFTWARE

-PERKIN  ORTEC MODEL  UMCBI PROGRAMMERS TOOLKIT

-EG&G ORTEC MODEL MAESTRO-32 FOR MATCHMAKER

-9327 1GHz Amp & Timing Discriminator

-  MVE dewar liquid nitrogen

-Pyramex LEAD HEAD WHA200 Auto Darkening Helmet

-Packard 500TR Flow Scintillation Analyzer

- Digi Dart  works with HPGe

-Canberra  1408C( did not  even check it yet.)

-Biospace Micro Imager

- Wallac 3H, 14C & Blank Unquenched LSC-Standards

-Packard  Flo One

-Alpha Particle Spark Detector

-Perkin Elmer 200 Liquid Flow Cell

-Radiomatic 525TR Flow Scintillation counter with software

-Radcal 1015 Radiation Detector/ X-Ray Monitor

-DM6801A Thermometer

- X-RAY LEATHER .75 MM LEAD PROTECTION GLOVES  22lbs  each one .

-37" long xray lead vest .5mm

-GrayMont Lead  Shield Container

-Beta Radiation Shielding Chamber

-Geiger Counter Radiacmeter Navy IM-141


And around 20 more devices.


Question for you my friends:
DO NOT YOU THINK THAT MAN WHO WORK WITH COLMAN HAVE HAD ENOUGH OF TIME TO FIND  IF COLMAN WORKS OR NOT- SO HE COULD STOP SPEND MONEY ON IT IF IT WAS NOT TO BE  WORTH  HIS EFFORT?


Think
If some of your comments are in some way not on the same page?
Think
If some of your comments are somewhat unpleasant  and nasty?

There are guys working on electrostatic concept  I work on COLMAN
GOT IT??  

And that what is above is only small portion of my lab.
I spend my money so you do not have to.
Please have some respect do not throw eggs at me.
I'm no harm to you.
but I might be a  BigTime help.

For those who care:
some more information about  equipment:

https://www.youtube.com/watch?v=CQ3gPFfgDp8
https://www.youtube.com/watch?v=k2PJVIkyW5Y
https://www.youtube.com/watch?v=MIfWgX8hA4A
https://www.youtube.com/watch?v=0xXZT7YQDE8
Wesley