Wireless energy by DadHav

Author Topic: Wireless energy by DadHav (Read 6978 times)

TinMan	Wireless energy by DadHav « on: 2015-04-11, 09:03:56 »
Group: Elite Experimentalist Hero Member Posts: 5677	I had to post this,as it's something i would like to try soon. John(DadHav) is a member here,although he dosnt visit much. But i thought this should be shown,along with some of his well built pulse motors. Enjoy https://www.youtube.com/watch?v=ekpVLnmdr2k --------------------------- Never let your schooling get in the way of your education.

Farmhand

Re: Wireless energy by DadHav « Reply #1 on: 2015-04-11, 11:06:56 »

Newbie

Posts: 564

Yeah it's good interesting stuff to experiment with.

Don't all his "grounds" go to the same place ? Because unless he has some actual ground between the individual ground connections it's just the same as many others have done. A Meyl like arrangement. I ran motors, filament bulbs, LED banks and even fluro's from my setup "which was similar but I drove mine at full resonant frequency with a DC chopper on the transmitter primary'. also I used an Armstrong Oscillator variant. And even transferred power from one steel shed to another via a single wire laying on the ground. He should know the neon will come on if he holds it even close to the coil. so should a fluro.

If he tunes his output coil he will get a sine wave output from it if the transmitter is outputting an auto tuned sine wave. And the power to the load on the output can be regulated by de-tuning the output tank.

..