Hydrogen on demand

Started by Cadman, 2019.09.10, 17:01:56

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Cadman

2019.09.10, 17:01:56
A working system, being tested in my neighborhood.

The Hydrogen Solution
AlGalCo
https://issuu.com/mcorbett/docs/hcbm_aug_sep_2019_web
See pages 12-13

Quote
Don't be looking for an AlGalCo station to fill up your car though.  During a meeting a few years ago in Silicon Valley with representatives of a major oil company, he says he was actually warned to stay out of the consumer market.  "They wanted me to understand my place in the entrepreneurial ecosystem"

Of course.
.
'Tis better to try and fail than never try at all

Centraflow

#1
2019.09.10, 18:17:42
2NaOH + 2Al +2H2O = 2NaAlO2 + 3H2   ;)

Regards

Mike 8)
"All truth passes through three stages. First, it is ridiculed, second it is violently opposed, and third, it is accepted as self-evident."
Arthur Schopenhauer, Philosopher, 1788-1860

As a general rule, the most successful person in life is the person that has the best information.

Paul-R

#2
2019.09.11, 16:12:45
Has he actually tried his system? He shows a diesel engine but If he has not altered the ignition timing  in  a petrol engine, he should get problems.

What is the cost in all the reagents per mile?

Cadman

#3
2019.09.11, 19:54:59
From the article the system has been used in a truck with a gasoline engine for seven years and he is working on a model for diesel engines. This is the 5th version of the system in the Carmel Street Department pickup truck and is about ready to go to market. No details on cost, but it must be competitive with gas and diesel if FedEx and UPS are interested, and he is targeting over-the-road trucks.
'Tis better to try and fail than never try at all

muDped

#4
2019.09.12, 05:06:01 Last Edit: 2019.09.12, 07:21:14 by muDped
Aluminum is a great source of Hydrogen but
ordinarily needs an acid or a base to react with.

Apparently the Aluminum-Gallium alloy will react
with neutral Water which is quite unique.

It is amazing that only 150 Grams of the Alloy
will generate enough Hydrogen to travel about
250 miles.

About the Aluminum-Gallium alloy.

I remember reading in an old patent some time ago
that Mercury coated Aluminum will also react with
water to produce Hydrogen.  Unfortunately, it is not
so easy with Mercury and it must be protected from
Oxygen in the air.  This process is used in
Chemistry however, to Hydrogenate certain
compounds in aqueous solutions.

More on the Aluminum amalgam and Hydrogen.

With a bit of careful preparation and ingenuity it
could be done with Mercury.  But for simplicity
and ease of generating Hydrogen in quantity the
proven reaction with dilute Sodium Hydroxide
would git 'er done.

For there is nothing hidden that will not be disclosed, and nothing concealed that will not be known or brought out into the open.
Print
Go Up Pages1
User actions