About different things

[Vasik041]

Today is Nikola Tesla birthday. There are many serious things usually written on this day, but today
I would like to share less known and not very serious story
Tesla had financial problems later in life, and in 1915, his famous Wardenclyffe tower plant was sold
to help pay off his $20,000 debt at the Waldorf-Astoria.
By the 1930s, Tesla had again racked up a sizable bill at a hotel, this time the Governor Clinton Hotel in Manhattan.
He couldn't afford the payment, so instead, Tesla offered the management something priceless: one of his inventions.
He told them the device—which he referred to as a death beam, not a death ray—was extremely dangerous, and could detonate if someone opened it without taking the proper precautions. When Tesla died in 1943, an MIT scientist working for the National Defense Research Committee was sent to Tesla's hotel room/lab to retrieve the potentially deadly weapon. John G. Trump later wrote that he took time to reflect upon his life before he opened the container.
He shouldn't have bothered. The only thing the wooden chest contained was a "multi-decade resistance
box of the type used for a Wheatstone bridge resistance measurements—a common standard item found in every electric laboratory before the turn of the century!" In other words, Tesla threw some common electrical components in a fancy-looking box and convinced everyone it was a "death beam" worth $10,000.
Tesla's good friend, Mark Twain, would have been proud

[Vasik041]

And here some reading for the date
book called "The Wrong Future we live in"
made in 2018, looks even better today with all that madness going around 

https://ferd041.files.wordpress.com/2018/09/fe_book.pdf

[Allcanadian]

Vasik041
From FE book...

It became clear that situation is quite serious. Active disinformation campaigns performed on
regular basis to confuse and distract people. And if I want achieve something, I have to begin from
the very beginning myself. I began refreshing my physics knowledge and setup my lab for
experiments. It took a little less than 10 years just to begin understand something. It is all before our
eyes. We just need to learn from the Nature and unlearn some nonsense which we were taught at
school.

Thanks for posting the FE book, it was a good read.

We could also add, on the internet consisting of billions of sites there are only a couple of forums dedicated to understanding FE. Of these few sites I have concluded that active disinformation is very common. It just seems improbable if not impossible that so many people could fail to understand something as obvious as FE. Were swimming in a sea of energy...

I also had a similar experience and started from the beginning myself. I found most of what we have been taught and what most believe is untenable or patently false having little or no basis in reality. It's a gong show, lol.

Regards
AC

[Vasik041]

Dally some weeks ago posted second video with his system based on interference.
It is amazing that there is almost no reaction to this on FE forums.
The system is a classic, many people started their research with this design.
And you can trace it back to Tesla work very easily (I hope you can .

Anyway here is a translated transcript of the video.
Have fun!

[Vasik041]

And a little of woodoo for you 

If you make experiments with Tesla coils or some other devices creating strong EM fields around
you may be noticed that such devices create phantoms.
Something remains for long time at the place where device was after device switched off and even moved away.
These phantoms creates same effects as original fields. And quite often these fields have severe negative effect on your health. Having such phantoms in your lab or home make place unhealthy. Even if you don't feel it directly you can feel that something is not right there.

Here a simple device which will help dispose phantoms.
Operation is very simple. You charge big capacitor and discharge it abruptly.
You can do it yourself or use this device which will do it automatically.
Just few minutes usually enough.

PS Yes, I know this sounds crazy. Choose yourself, ignore and suffer or use knowledge proposed for you.

[picowatt]

Dally some weeks ago posted second video with his system based on interference.
It is amazing that there is almost no reaction to this on FE forums.
The system is a classic, many people started their research with this design.
And you can trace it back to Tesla work very easily (I hope you can .

Anyway here is a translated transcript of the video.
Have fun!

Vasik,

Do you have a link to the video?

Thanks...

PW

[Vasik041]

Vasik,

Do you have a link to the video?

Thanks...

PW

PW,

yes, it is in the translation document.

and here https://www.youtube.com/watch?v=730MtctOC_w

Vasik

[Vasik041]

Some reading about ferrites, saturation etc
For those who like puzzles


PS check this if you haven't seen it https://www.overunityresearch.com/index.php?topic=3453.msg87261#msg87261

[NickZ]

   Vasik:
   Do you think that Dally and Vasmus are the same person, Ed?
   You know how people can show up years later using a different user name.
   Or, is the new video from Ed, just a similar type of replication, of the previously shown Vasmus device?

   NicKZ

[Vasik041]

   Vasik:
   Do you think that Dally and Vasmus are the same person, Ed?
   You know how people can show up years later using a different user name.
   Or, is the new video from Ed, just a similar type of replication, of the previously shown Vasmus device?

   NicKZ

I think they are different people.
What difference does it make ?

Vasik

[NickZ]

   As the device looks to be made by the same guy. There is only one guy that built a similar device, Vasmus, and this new device looks just like a replication of that.
   What difference does it make?  It makes no difference, if nobody cares about who made what. But, I do care.
   
   NickZ

[Vasik041]

   As the device looks to be made by the same guy. There is only one guy that built a similar device, Vasmus, and this new device looks just like a replication of that.
   What difference does it make?  It makes no difference, if nobody cares about who made what. But, I do care.
   
   NickZ

Nick,

I don't think it looks similar https://www.youtube.com/watch?v=7lDQJOAY7ks
Vasmus device is different. It is closer to Akula/Ruslan's device.

Vasik

[Sm0ky2]

Dally some weeks ago posted second video with his system based on interference.
It is amazing that there is almost no reaction to this on FE forums.
The system is a classic, many people started their research with this design.
And you can trace it back to Tesla work very easily (I hope you can .

Anyway here is a translated transcript of the video.
Have fun!

One of the first things we are taught in electronics is concerning the excess build up of energy in our circuits
due to constructive interference.
AND subsequently how to avoid or eliminate it.
Mostly for the reasons that our circuit does not perform or the components may burn up.
I find it ironic that noone ever mentions what benefit we may gain from constructive interference.
The subject is thermodynamically incompatible, and only briefly discussed on a technical level of dangers.

In many ways, constructive interference, wether by light waves or EMF or sound, etc, resembles nuclear mathematics.
I've always pondered that there may be stages of criticality in these areas as well.

[Vasik041]

I find it ironic that none ever mentions what benefit we may gain from constructive interference.

Unfortunately this kind of violent behavior is so deep in the culture, so nobody recognize it anymore.
Modern science is more like a war. It fights with nature.
Fights with microbes, fights with EM interference, fights with global warming, fights with people who think differently...

Vasik

[Sm0ky2]

We all know how an opera singer can break a wine glass.
But what happens when the wine glass is metal?

Or sized for a different tune?
Perhaps the average car-on-pavement sound?
Or a major frequency produced by airplane engines?
Train sounds, or those made by wind powered sound producers?


Physical vibrations as well:
A flexible bridge designed for energy production?
Tesla's "earthquake machine" oscillator?

Magneto-mechanical oscillation can also do this

And of course EMF, RF, and light, atomic energy

[Vasik041]

Many of us have some experience with conventional electronics.
But open circuits and one wire usage was banned from it.
And so when I saw first time FE device connected to the ground and meter showing many amperes going in the ground wire I thought: nonsense, it can't be true
It is natural reaction for a person who didn't study Tesla works in detail.

Anyway, here a very simple circuit which allow you see (and measure if you like) current in the ground wire.
You can even put a lamp there and it will lit.
However to not take away from you joy of discovery I will not tell you, whether lamp get hot or not 
(Some people suggest that it's a cold current, so lamp will not produce any heat while being brightly lit)

To create even more confusion, I will attach fancy scope traces obtained from such setup 

Have fun,
Vasik

[muDped]

Your schematic diagram has an inductor labeled with a value of 47 uF.

Clarification?

[Vasik041]

Your schematic diagram has an inductor labeled with a value of 47 uF.

Clarification?

Just a choke on ring core, can be found in old power supplies
It's 47uH

[picowatt]

Many of us have some experience with conventional electronics.
But open circuits and one wire usage was banned from it.

"Banned"?  I do not believe this to be the case...

And so when I saw first time FE device connected to the ground and meter showing many amperes going in the ground wire I thought: nonsense, it can't be true
It is natural reaction for a person who didn't study Tesla works in detail.

There has been a great deal of study and a much greater understanding of the propagation ULF and VLF frequencies since Tesla's time.  In fact, there are several "Wardenclyffe" type systems operating throughout the world complete with very large grounding systems and top capacities running at up to 1.2 megavolts.  These typically operate at around 24KHz.

PW

[Vasik041]

PW,

yes, I know that some people use this, but show me at least one easily available
physics book where use of open circuits described ?

Vasik

PS http://www.gbv.de/dms/ilmenau/toc/756638089.PDF ?

[Vasik041]

The next step in exploring current in ground wire would be adding...interruptions.
Our "usual" electronic experience suggests that if we let Tesla coil working only a small fraction of time
power will reduce proportionally.
With a simple addition to a previous schematic you can find that it is not true.
Adding interruptions let us lit lamp brighter and make sparks much longer with less power consumed from power supply.

Have fun,
Vasik

[Vasik041]

Some related reading

[Allcanadian]

On open circuits... I thought this was interesting.
https://www.scienceforums.com/topic/37166-electricity-flows-in-an-open-circuit-too/
https://www.youtube.com/watch?v=TvA4meGuhDc&t=15s
https://www.youtube.com/watch?v=r_W4XKImMwQ&t=74s

It's a comedy of errors by all involved in my opinion, the poster for not understanding the science/prior art regarding what electricity is and how it works, as well as the supposed experts. 

There is no magic here and the easier it is for some free electrons to move from one place to another the more electrons can flow as a current. It could be an Earth ground having many free electrons or large object having the same properties. What many call a ground is in fact "Capacitance", ie "the ratio of the amount of electric charge stored on a conductor to a difference in electric potential". The Earth or a large object is a convenient place to give or take free electrons to increase the number of free electrons in motion within a system.

In fact I did the same experiments and found it fascinating, the larger the number of turns in a pair of coils coil relating to surface area or in general two large bodies the more current could be set in motion between them. There is little difference between a coil acting as a capacitor or a plate because surface area, which most ignore, is the determining factor. The ease of which a given number of charges can move between two regions before the like charges start to repel one another.

So much confusion over something so simple...

Regards
AC

[Vasik041]

AC,

so, what is your opinion, why led is lit in this circuit

Regards,
Vasik

[NickZ]

    Me thinks:
   The led is lit because the two metal objects (the metal beam, and the door) are not isolated. They are both on the ground, and the ground is conducting the small amount of current and voltage. Otherwise the led would be burnt out from the full wattage of the 12v battery onto the 3v led.