PopularFX
Home Help Search Login Register
Welcome,Guest. Please login or register.
2025-12-18, 23:42:15
News: The text input boxes (where you write your messages) are resizeable.  Just drag the bottom border of the text box to size it appropriately to your device.  The changes are persistent across your devices.

Pages: 1 2 3 4 [5] 6 7 8
Author Topic: Quantum Field Fabric  (Read 33752 times)
Group: Moderator
Hero Member
*****

Posts: 557
Structure

The structure of the universe, is something no one can change, alter, or even argue with. If we discover it, then what we design works.
If we instead imagine wild theories, even with math to support them, it may work for one or two cases then stop working at different levels of frequency.

The "basic concept" is straight forwards, it works at all levels of dimension. It has to.

People of higher education are blinded by the sophistication of attempts to make it far more complex then it actually is or could be.
Rather then getting simpler, they have to extrapolate to fantasize it must be more complex as we go smaller.

If we take some dynamite and blow up a car, then study how all the pieces fly away, and then try to claim each piece is a new discovery, we are attempting to find uniformity in chaos! LOL!

If we cannot study matter without dissecting it, then we have to consider the energy added to dissect it is also present and if it is an explosion then we have introduced chaos into the mix of what is observed.

With all the nuclear particle collisions they still have no idea how to create anything from the Field Fabric! They are getting much better at destroying things however. Nuclear fusion is very complex, and they are now getting much closer trying to create a small version of the sun. Right now it is not even over unity as the magnetic coils eat up all the gains to keep the plasma from touching the sides of the device.

The boson labeled the God particle??? Who can make anything on the bench with such a physics?
We can build atoms of elements in a water cell using only around 5vdc!

Comical, as mankind professes his higher intelligence, with degrees to prove it, then tripping over his own ego and failing to reach comprehension.

They refuse to study anything they cannot understand from where they think they are now. What scientist would work with a Joe Cell, even after seeing Joe manifest oil from water in one?

Obviously the third field force requires a new untapped sensing ability to see it clearly. EM only represents two of the field forces.
What lies under this is the Tempic field system of vibration that powers the universe. In the beginning, the vibration went out, and manifest the universe. The "Light and the Sound" of the ancient religions. They all take us to the same place. Vibration.

The inflated egos of the masses of scientists today remain blind to accept reality, and include their own consciousness as a structure of the universe.
Thus to take the next step we have to embrace what we are in its totality, and study ourselves.

100 percent accuracy of psi can be achieved if we focus it instead on science, and get past our own emotions!
Science has gone far enough and found the "metrics" of creation. They have simply not yet realized it.

It still amazes me that a scientist can believe it all came about by accident, without any conscious direction.
One Quantum physicist is now spouting there is no such a thing as "free will!"
They are so resistant to the concept of a conscious field, even though one exists right inside their own head and there is no attempt to explain where it came form, what it is , and what if anything it can do except calculations by trial and error. They will not even touch trying to define what Comprehension is, as it does not land inside their level of narrow focused study.

Material science has it's place for sure and has now given us nano tech. Carbon structure forms that do some amazing things, even grow.
A graphene layer with GANS on it will glow itself down a copper wire. Thank you Keshe for handing that to the world, no longer kept as a secret.
If we hit it with small EM pulses as it forms it can become a super conductor when placed over copper wire, in only one geometric orientation, a high resistance in all other directions. The wire needs no insulation and has no resistance! The final result also has a vibration around it which I measured a fractal for! That had to be there for it work! [2.64 mm]

Keshe nano Coating experiment video

We have had this for about 5 years now, and no one is seriously developing it I am aware of. Amazing!
It was shown to work by a few people out there. Most get the process wrong to program the carbon layer with taps of small voltages to polarize it correctly so it fails more often then it works. Keshe is one long winded speaker, but that is no excuse really, the techniques are now even recorded.

Electronics people see carbon only in resistors, they have no idea it can be a superconductor if manipulated correctly as it hardens.

It is hard for people to duplicate things with no comprehension of why it works. The Keshe tech fails due to bad training practices near as I can tell, and so many blind duplications fail it is amazing. Some of them actually work though.

As the carbon layer cools, I tap it with the VM and I can feel the field come up around it!
Am I the only one?
No apparently Keshe can get it to work also.
Maybe where he went wrong was with the coke bottle reactor! LOL! Hilarious watching so many people waste time with that when they could have been fabricating super conductor wire.

Where are all the geniuses who should be making superconductor wire by now? We were all handed the methods and a long winded hours long explanation. I should talk, here I am writing mounds of verbiage myself in attempts to pass something along that also works.

Keshe made no attempt to quantify the third field force however. He does demonstrate that he can also feel it if you happen to find the exact video in the maze of videos where he touches the hot wire and states he only takes from it what he needs. LOL!

This was why I finally went back and made the Lessons, to hand it all to people more directly with shorter verbiage.

http://www.resonantfractals.org/Doc/1index.html

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Quantum Field Fabric Depletion

There is nothing I can see in the Quantum Field to suggest that wormholes to jump around the universe based on giant gravity fields would work.
Folding space and time is a theory at best.

Max Planck calculated the maximum power available from it in joules and then watts per cubic meter. Its not enough to bend space as described in worm hole travel. This is not how it is done, or could even work, as it would drastically mess up all the forms around it if it worked. Traveling through it would also slow down time so much you might never be able to get through it.

How do the ships travel? They use time synchronization with the Quantum field fabric which is scanned by the One in serial format.

A form must be moved to a different location in space, by changing "when" it appears in the constant stream of updates.
Someone had calculated this frequency, and it is too high for us to mess with right now, but what we end up with is what Otis Carr experienced with his saucer craft. His craft jumped down the ball field to the other end instantly by our measure of time. It used a conscious process and frequency markers of color. It did not travel at all, it jumped over the update field between the two points, by synchronizing itself to be at a different time.

We can compare this to moving an image on an old TV set by placing the signal at a different point in the time as the screens oscillators scan the screen and update it at 60 Hz, with a changing frame rate of 30 Hz using interlaced scanning. There were two scan down the screen for every still frame.

This teleporting operation uses consciousness, and one must be able to cipher and gain a feel for the scan rate of the universe.
Every location is updated at a different time in the serial flow of the update field, the conscious field of the universe itself.

Changing when your matter updates in this stream changes the location of where you appear to be.

I know this sounds crazy, as that frequency is so high we can hardly imagine it. But for fractals to work as they do, the universe must be finite in dimensions and it's highest frequency is the diameter of a finite boundary. There is a frequency that can be used to teleport.
The universe itself moves you, you do not need any power for this operation what you need is the sensitivity to master it.

Bashar gave a technique to practice this but I had no luck myself with it, as of yet.

All the good stuff uses the energy of the Field to do the work for us.

Mathematically, this is the only thing I can see that can work. Otherwise the energy of the Quantum field fabric to create such a worm hole would be depleted before it could work to bend the fabric that much, and if it could it would also compress the field between the two points and maybe destroy planets or suns in between. A ridiculous concept from what I know at this point.

My conclusion is based on how the field fabric creates the electric field spin from a stationary Quantum Field Fabric using the area of the form as a resonance frequency. The diameter looses sync with the stationary field, and can then move through it at up to light velocity.

That power is created by a synchronization, which cannot then set still and has to spin because when the next update comes through it hits the next point on the circle causing it to reposition. This is a strobing effect, and was also offered by Bashar, and I proved it in my experiments.
All the field forces are created by the field itself using frequency metrics.

Everything relies on frequency update and strobing sync.
Another of the things I did not want to believe until I tried it and found the correct mathematics to make it happen consistently.

This can be proven right on the bench!
The universe is strobed, nothing can change until the active strobe comes through.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Relativity

If you have studied relativity and special relativity, you realize that the time flow rate is dependent on two factors. Velocity and the intensity of the gravity field you are inside of, and these work in opposite ways. Proven in the GPS systems with atomic clocks.

While we credit Einstein for this concept, he took it further then it can work with worm hole theory, ignoring the energy of the Quantum field that Plank had ciphered. He did say it would take the energy of the entire universe to accomplish some of these things, but he did not state that it would also really mess up the universe if it were possible. Bending that much space would be a disaster for anything in between!

Bashar described how it works. The update field with fixed scan rates is what moves things around. If we take a circle that is stationary, updates inside this circle can happen at a specific rate, but if we start to move this circle through space, some of the update time is spent in moving it, and less time is left to update what is inside it. This fully describes time dilation effects as observed. We age slower in specific conditions of gravity and motion with respect to the center of the universe. This also ends the paradox of two points or reference by adding a third to resolve the truth.

I did not believe any of this until the space document experiments showed me the theory seems to be sound.
This is how the universe creates spin, and thus voltage charge.
And as voltage becomes power that can move around, the universe powers it using tempic field or synchronization with the Quantum Field Fabric.

Space

The final frontier, right.

So glad they sent Captain Kirk into space, at least one of them made it up there, and why not the most dramatic one!

Yes when I brought in the theory of a strobed universe it all worked.

Bashar stated it is the same single point that strobes the entire universe and that is why we can scan it using psi anywhere, when we connect with IT.

Some fields I set up, locked themselves to the earth grid and could not be moved, then when I used the area conversion, the fields could then be moved using my mind and feel for vibration.

Once again consciousness conquers space and time.
And if you can just feel vibration energy that is how it is all controlled, it works.
When something works consistently we call it science.

Dave L
« Last Edit: 2022-01-05, 05:27:14 by DaveL »
   
Group: Moderator
Hero Member
*****

Posts: 557
Shut Down - Auto Work

It is more common someone corresponds with me to assist them in shutting down a field they worked so hard on to create.
I scan and measure it, try to identify the form, then give them the TDF and if they can not get it to work, then I will use it remotely for them.

Tinkerers, hit on this stuff and many do not know why it works or how to control it.

Another case I put a field on a car remotely form Alaska to California for a guy, an 89/50. I used my caliper to find the point where the light activation happened, from the calculated piston stroke length. He got good results with only one layer on the car, driving long distances to a work location.

The heavy GL wires between the radiator and the engine, cause the engine to run cooler. I got reports of one guy that had to drive over the mountains regularly, and reported the engine stays much cooler going up the long hauls.

Vibration is the cold energy in many cases.

7x GL resonance

A photo in this document, showing how it is attached to the radiator hose.
People who drive long distances often and have a feel for the car are usually able to fee the difference very soon.
Some who do not drive much are not aware of the feel of the car, and do not feel anything for shorter driving times.

Also at the top of that document we see that the electrical tape starts to shift into a cone shape along the various segments of the copper pipes, showing an active vibration energy gets turned into a pressure with a pattern in the dielectric of the tape.
The 7x segment configuration is a most compressive field compared to the 8x full octave which feels very balanced and pure for the GL.

Then at the bottom is the oil probe design we experimented with. Oil like iron generates a very expansive field with a high tension on it at the boundary of the field. In the car when the plugs fire it blows a hole in this field and the pistons fly up with much less inertial resistance.
This was developed by a man named Robert Hull who attempted to patent and then hand it to the auto manufacturers, you can guess where that went.
He was a able to get a tractor running without fuel by doing these sort of mods, but he never solved the RPM problem the 89/50 solved years later.

This work has been a lot of fun working with people all over the world, and many of them also enjoyed playing with it, as the vibration energy tends to accelerate the mind as well and produce clear thinking abilities in most cases if you are really feeling it.
Only problem we had in older cars with iron engine blocks were some get headaches from the iron produced tension on the boundary of the field.
The old pinto we worked on did this to me when I set inside the car, but on the RAV it always felt good.

Joe cells were found to be lacking due to the RPM problem, they were not consistent across all RPMs.
One could however use the 89/50 piston resonance on a cell if they wanted to correct that problem.
The cell should amplify the effects of inertial and gravity release.

On one of my trips to Bernie in Oregon, when he drove me back to the airport to leave after a week or , I was tweaking the Joe Cell on the passenger side and he was driving, a long trip. When we finally reached the airport, the tweak was so amazing, neither of us wanted to stop driving!
We had turned that little Honda into a full out racing machine, and it was very addictive!
We were flying as high as the car was! Mental powers were so clear, and the faster time we were experiencing was a lot of fun.

Poly Cell

A shot of the Honda in this one, where we were playing with a cell that was tuned on every tube for 1/4" resonance.
That cell turned out to fracture water with very little voltage, but it did not do much for the car as it is did not set up the recursive field compression of a normal cell. Basically it only really produce one frequency with no higher octaves on the larger tubes. Every water gap would bubble up instantly with 5 vdc across the cell.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Joe Cell Menu

More recently I went through and found many of the Joe Cell documents and created a menu with the latest information at the top.

Joe Cell Menu

Read the Warnings as it has both the safety info and the Browns gas response explained as to how to get the cell into all three of the modes instantly.

Also a document in there on the Strong Force of the atom, is pretty good to explain the difference in polarity for the 3 field forces.
The Joe Cell produces fields similar to the strong force of the atom. This is why it can run an engine with no gasoline when you get it right.

Some info in there on using the isotope frequencies to set voltages and tune vibrations using the Gold fractal, short of out right telling you that you can in fact manifest Gold in a cell. But the data is there to show how. One must tread lightly around that subject on public documents.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
TDF's for Joe Cells

Joe down under stated once a cell was set up to produce a specific thing, as to manifest a specific element, he could never use that cell for anything else again. Joe never realized that a self sustaining Isotope field can be taken back down using a TDF. For that matter he did all his work by feel, and never used F gens or scalar coils at all, nor would he know what to do with them.

We solved all these issues with the cells, and using calculation, we can indeed remove a program and place a different one on the cell, over and over.
Almost any good cell can be used to manifest elements of your choice, and then set up to do a different element. The good cell I have in the photo on the menu has manifested 3 different elements, and besides this the tubes are tuned to the gravity fractal, a most natural vibration that is everywhere on the earth.

It must be set up on a good steel table, and so many people try to ignore that and then it is very hard for the cell to take off with much power.
You may fight with getting a cell to hold a charge for years on a wooden bench, and never realize what it can do with a steel mass right under it. Just under the insulator pad. It will never start the regenerative recursive power compression loop instantly without that.

As with all Isotope resonance fields, greater mass is greater power.

The one exception I found was to find an earth node and set the cell up directly over it, it will then tap into the earth mass and take off.
These can be found using the 13,5 cm copper pipe method most quickly.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Sources of Vibration Power - energy cycles

Pi/2 ratio is the ratio that generates the circle, and it can cycle the emotions back around faster then any other method I am aware of.

"Emotions are a good starting point to learn to measure vibration, because everyone can feel them, and there is no debate as to if they are real.
They follow the circular law, and should always cycle."

-------------------------------------------------------------

There is some measure of learning between first feeling vibration energy, and the ability to scan remotely, I will not kid you. The spherical sense is the difference.

Awakening to scanning ability, and measuring at distance is a total freedom hard to express. A sensation that can be truly amazing.
My favorite is to slide out over the oceans at high velocity, see and feel everything around me, and then see the coast line of the US approaching so fast.

I then ask to see all the people in the US whom are awakening to these energies, and about 1000 little lights come up all over it!
I can feel every one of them, zero in and slide down to visit them.

They are no longer a rare thing!

So why am here in a science oriented site? Because this part is also needed to move into the free energy systems we all suspect are possible.
We have to use all the information we have access to, both the physical data and the human metaphysical part.

These two levels of frequency meet at the threshold of manifesting. Vibration Sources are all around us.

We all had to work this backwards from the physical side moving upwards, but from the metaphysical side it works opposite, we have to descend.
The meeting place of the light body and the physical brains awareness is at the center of 4th density where both bodies can commune freely.

Workable Sources,

Earth Grid Nodal Points

Gravity Fractal

RA Fractal

Isotope Fields from the periodic table of elements starting with Hydrogen 1H.

The diamagnetic responding elements - ABCH as one does not have to know the Isotope frequency to access these.

Power Grid - for examples of tapping the pressure fields directly at distance 200 mm

333000 - Earth frequency presence in the Space around our world

And finally the Planck Length of the Quantum level directly. Map this one onto the lateral surface area of a dual cone system and the electric field also comes up with it. The ultimate Source. Yet to be experimented with, over the simple caliper tests I performed that scared me a bit.

Their are also so many more present, all with energy of vibrations at specific measurable frequencies. Everyone of them will respond to ratio applications. Square root of two ratio will self power two spins at 90 degrees to one another, pi/2 will self power two that are concentric and parallel.
E/P operates at 90 degrees to couple the Electron and Proton flows and lock them together at larger fractal dimensions.

Once you have access, to 4th density, anything you have a strong curiosity over will come to you as information even before you can form the words to ask the question, because that process is a delayed mental function of the local ego.

We are used to having a curiosity, then rout this into our mental language center and form a serial string of words, but the higher self responds directly to the presence of the curiosity, and does not need the serial language. So the physical mind process has to do it later, decoding the comprehensions to the serial language to share the information with others.

The machine processes of the physical brain, then become the servant of the higher self as it truly is, the higher will.
For the comprehension does not come from the small ego mind.

A pure curiosity will light up around the head with an intense blue light, seen by other sensitives.
From the mouth then will come a sincere seeking to know, a plea to understand, but this is after the energy has already formed around the head and filled you with the sensation of curiosity.

That sensation is the request to spirit.

The answer will come just as fast and if you have the spherical awareness developed you will then have comprehension.

This must be a technical process to have accuracy, and avoid all emotional charge to a neutrality of all things present at all times.
--------------------------------------------------------

The local brain will accelerate when it is balanced, and both sides can vibrate up faster.
Nothing can be resisted, or it will change the balance of the thoughts.

Multilevel thinking includes both sides of all issued in balance, with no preference to either side, but recognizes both sides are valid to create what is, and both sides must always be charged.

The knowing happens when all the information is present, no matter how any of it may seem to contradict in purpose.

In the pi/2 ratio experiments, we come to realize, we can take any nasty frequency, add the other one, and the energy is instantly tamed to a state of harmony the body will recognize as life force itself.

There is no need to join into a battle of good versus bad frequencies as so many beginners will try to do with no understanding of the balance and the dance. With only the one frequency in the lower emotional range, they want to fight with it, rather then simply activate it correctly.

I did experiments with my own emotions, when a nasty one came over me, I measured its frequency then calculated a pi/2 ratio, applied that one, and it instantly changed to pull me up and start to laugh at it. This is waking up to your own power over the emotional spectrum. Once we feel this shift, it becomes natural to do it again without the calipers, if one has learned to "slide."

Using the SS calipers only works when you are feeling it! Then when we hit the resonant distance the calipers vibrate up in our hands.
The greatest discovery for ones that seem to remain in depression states a lot of the time.
We do not need drugs to deaden the bad feelings, all we need is education on how to balance them with the higher frequencies and make them dance.

All interactions of relationships, come to life when the two people are at different frequencies which hit these ratios. So many end up at the same nasty frequency and then split up, seeing what is bad only in themselves. Triggers, they are not even aware of technically!

It's all Technical!

But the joy is real, and if the joy is not present, we suffer much.

Learning to "slide" changes everything, and is taking back our power.

I approach a woman I know who is crying, give her a hug and feel the frequency, then I become the higher frequency pi/2, and without a word the emotions start to heal and light up with all kinds of solutions to the problem. The mistake is to let her pull you into her nightmare of suffering, and go down the whirlpool with her.

In Jin shin Do healing arts, we are given the parable, someone is in the water starting to drown, our choice is empathy and jump in with them as we both then sink, or to extend a hand from the shore, and let them "choose to grab for it or not" before they sink, and this is compassion where we assist from a place of strength.

It is a hard lesson to learn in relationships as we often tend to let the female set the emotional frequency for both of us.
Generally the woman feeds the negative emotion longer, but just wants it to pass.

That is my experience, and I know there are very emotional men out there too, so not trying to be sexist here, only hand people a technique that may work better to form stronger bonds between people who are more aware of the technical part of the frequency spectrum, and can learn to measure it.

We all experience our emotions, but we do not have to be slaves to them, they are all temporary, and we are so much more.
Pi/2 ratio is the ratio that generates the circle, and it can cycle the emotions back around faster then any other method I am aware of.

Emotions are a good starting point to learn to measure vibration, because everyone can feel them, and there is no debate as to if they are real.
They follow the circular law, and should always cycle.

Have your Stainless Steel caliper nearby and ready, and when you are inside one of these powerful emotions is the time to pick it up and start sliding it opened. This is the dual awareness, when the mind must not freeze, but be able to do the lower job while the local brain is inside a stronger feel felt experience. The logic mind function is then a servant to the greater energy of the emotions and the will to understand.

Whom is able to feel a strong emotion, and simultaneously measure it's frequency. We will have many opportunities to experiment with this while in the human body form.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Use all the data we have access to

Nothing can be left out to reach a higher level of understanding.
As with the last post exposing that the strong emotions are a gateway, into the 4th density awareness.
If we can just keep enough of the logic mind present also, we can learn to measure the frequencies, and then slide up a bit to hit the pi/2 and cause them to cycle back around much more quickly.

When both side are exposed simultaneously we comes into a state of conscious balance with the brain, see all sides of all issues simultaneously, and then get the higher perception of the full dance.

This is exactly how the components of the atom "feel."

We have the Protons compression force, that creates fear if it is measured alone, and we have the expansion and radiance of the Electrons shells, with their higher frequency, that feel much better, even sometime angelic.

What goes on at the core, is the power, and it may not be a blissful experience for most people, thus natures method to keep the secrets of power away from the ones whom are not ready to feel the entire spectrum without emotional reactions to it.

All manifestation of energy and matter must come into the 3rd density through the lower 4th boundary. What we first feel as raw fear state emotionally.
This is done down deep inside the atom at it core. The nuclear strong force. The one that no EM field can even disturb, only correct frequency can manipulate.

We then begin to embrace the technology of vibration and accuracy in both measurement and transmission of such, and discover how little energy it takes to start manipulating this powerful force of nature.

Bearden compares this to a triode vacuum tube, and manipulation of the grid to control the HV plate current. An amplification system using electrons flowing through a vacuum, and geometry to manipulate it.

It is even more powerful then this, as mass vibration at resonance will self propagate through the entire material of a consistent metal, and every single atom will then begin to power it as a larger coherent field. This brings up the strong force vibration system around the metal at the fractal distance of choice, powered from the same frequencies that power those atom. Lager dimension is higher frequency is more power.

One little quartz crystal resonance touching a car at the correct spot, can vibrate up the entire cars metals, and start to effect how it handles on the road! That is better then a vacuum tube can do, but the energy form is not so familiar as electricity which cannot do that. Electricity would short out on the metals and flow between only two points on the car frame. Generate some heat as the power is lost to dissipation and have no effect on how the car handles at all.

Inertia happens at the center of mass of all the atoms in the cars metals, where the weight is located, and the Isotopes are always spinning.
The car is manufactured with compounds that are very consistent over larger areas of it's total mass, and so field coherence is not a problem.

If the field is strong enough the resistance to air flow over the car is reduced. The slip stream effect described by Robert Hull many years ago.

All this should have been being developed, but it has stopped. Mentally we are stuck with EM technology as a public.
EM is far more dangerous for the most part. A lifter will used kilovolts to generate an ion flow of air, but you cannot touch or get anywhere near these charged surfaces. Mass vibration techniques, manipulate these things at the location where they originate, at the mass of the atoms.

All the Isotopes inside any one element are totally identical!
We can manipulate two different ones as one by using the sum of the two frequencies.

I have done all this stuff already. Proved out the formulas in real experiments, on the bench and in cars, and in pipes and wires cut to specific lengths, then using scalar coils as well to activate them in random lengths such that they self sustain over the entire metal targeted.

If one is going to play with free energy, it is better to know how to shut it back off, before setting it up.
An example of one experiment, where I did not know, until much later the easy way to shut it back down.
It charged a local spot, such that the field would charge up another glass of water if placed there.
The original experiment done in 2016, and the update in 2020 to shut it back down with one manipulation.

Water

I hate to see others have the same problems with this energy as they bone through it making all the same mistakes.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Tempic Field Is Universal

Everything has frequency operating it. There is nothing we cannot tune into using fractals.

For the electronics person we can use a scope and a frequency generator to locate the resonance of a coil system, or a coil capacitor system, and we use our eyes to see the peak energy as we tune the F gen across the bands, watching our O-scope. As every coil also has a capacitance, this frequency can be measured as a series resonance using a resister in series with it, and if we proceed with this line of investigation, the complex calculations of inductive and capacitive reactance become pretty meaningless. We can find it faster in reality, then all the calculation that come up a little off usually.

If you are an experimenter who does this with EM systems, as I have been, you get the idea. Reality is not the same as engineering from formulas in many cases. Measuring is faster.

With vibration resonance the peak of energy is felt in the body, consciously, we are the detector of it's power level. This is a lot faster in practice.

I sat down with the laser system and found its exact frequency from a fractal that is a bit larger then its wavelength. This was very easy for me to verify. I set the caliper 90 degrees across the beam and it vibrates up and peaks at the correct wavelength times 8 as many times as I need to expand it for measurement.

The geometric expansion formula from Walter Russell and Wilbert Smith hands us the detection system. Hendershot, also a machinist and probably doing this too with the 150 mm length and his basket weave coil design.

Hendershots frequency 500 khz. His basket coil diameter weaving back and forth over the 150 mm diameter, Ra fractal.

Why do we suppose the WWV system took these even frequencies for themselves, and would not let anyone else use them?
Harmonics of 5 Mhz, 10 Mhz, 15 Mhz, and 2.5 Mhz down to .5 Mhz where Hendershot was resonating.
Not saying he had a WWV station down the block pumping out 100's of KW to get his 300 watts of energy, but who knows?
WWV chose frequencies that seem to propagate a pretty far distance.

There is an underlying fractal that provides a lot of energy as a T field carrier already present!
This fractal was known back in Egypt, and rediscovered in the very early days before WWV existed.

RA fractal has two vibration resonance systems that cross one another at 150 mm of length.
30 mm and 50 mm, and they both then overlap in a resonance gap distance of 150 mm.
A copper or aluminum pipe or tube cut to this length will charge up the physical body and pull it back into 3rd density awareness, to get back from a slide out of body.

This is the free energy that is all around us all the time, and because the frequency does not change we stop feeling it.

---------------------------------------------

Both the human sensory system, and the copper induction systems, only really respond to a change of intensity or frequency.

For copper to produce an electric field, it must experience a change of magnetic field intensity.

So we set up a scalar coil, set it on a Ra tube and then tune back and forth over 150 khz while touching the copper and then we discover it is very easy to feel what mass resonance is all about. It is about location of the energy vibrations that are already all around us but we do not feel them because they do not change.

Your electronics measurements are thus a great advantage, because as the ones of ascension are doing using their imaginations constantly to cloud what is in front of them by seeking the highest and greatest emotions rather then the actual physics that is present now in real time.

Perception is ever important, and thus working with the physical body to understand how it will respond in real time is a great advantage.
Taking a measurement with a meter or scope, we do not want to be floating off into the pretend eithers!
Same with measuring a fractal resonance value.

Even emotions are found to be very technical when this door is opened.

All the ones who have worked the Quantum Field Fabric successfully, have stated the same. We have to become aware of how our device effects the human body and the distance out from it that it produces fields. They condition the space where they set.
Few however know how to remove the space conditioning and fully clear it if they move the device.
Few understand how to set one up so the field moves with the device, and does not anchor into the local earth fields space, or lock into the earth grid.

In the water experiment above, the field locks right into the earth grid and will not come down until we release it using the TDF. Move the water glass and the field does not go with it. These experiments were essential to comprehension of what we are doing when we access the Tempic field energy system.

I have offered the best tools, the ones that work in experiments the best, and the fastest way to get there.

Every design was crafted from the sciences for the strongest responses. The human body can then begin to feel and record these frequencies, and then with the math start to amplify and use them. Mass vibration is the access to gravity control and free energy. I could find no other source, that is never changing or depleted. Wind and solar do not even compare.

The Hydrogen cycle, is also a source as it is the prime atom of the universe, and the most dangerous to open up. Implosion, with a lagging explosion.

Seek the source of the power, and we all end up at the same place.

The nuclear strong force.

And if one has felt an H1 bubble implode at the top of a Joe Cell and felt it shake the building and hurt the ears, then they know this is true.
Fire crackers that explode are very weak compared to that experience.

EM is limited and can never be that powerful compared to the strong force of the atom.
----------------------------------------------

The three field forces have different elasticity, or compressability.

We set up two magnet on a shaft to oppose and note as we press them together the result is very bouncy and cushioned.
We play with a voltage charge and discover it is far less cushiony and much faster to react.
We then play with the tempic field vibration system and discover it is so inflexible the resonance distances never change at all anywhere on earth.

EM is all about a resonance that happens between the 3D magnetic field and the 2D electric field. Energy will bounce back and forth between these two and then slowly dissipate. If there is no new energy coming in from somewhere, it will also be entropic.
If this were not the case our world would not be stable at all.

If the nuclear strong force was not there, everything would eventually wind down, spread out and then stop moving.

There has to be an underlying field force that keeps adding energy without end, in a very stable way that things do not expand and explode, and yet they never stop working, and moving. The orbital motion is the factor that stabilizes all matter, and it is based on the intersection of a pi/2 with a phi energy system. Experiments with these two ratios using vibration systems makes this self evident. The Fibanocci strings are everywhere in nature and phi is the perfection of that string of powering fractals. pi/2 is the only way to harness them, and temper them so they do not explode outwards.

This would not seem real until one crafts the vibration resonance systems to prove it to themselves.
The first experience with a pure phi, will go out of control very fast. The power must be routed into a spin to keep it from going out of control.

We can then in fact move into the math at this point to create the effect we desire to manifest, as we know how to produce force using fib and phi ratios, and then how to control them using spin with pi/2 ratios [spin deflection], and setting up two concentric but offset, we can generate stability or thrust in one direction. This is not rocket science, with the disconnect of local gravity it becomes much more simple.

It is easier to control gravity using mass vibration then to generate electrical power with it. It is more simple.
The EM field must be deflected by 90 degree points of spin crossing spin to produce EM fields. This take more calculation for sure as it is more complex.

A civilization that uses vibration energy would find gravity control before finding EM powering systems. They would also then find power generation stations a rather silly way to do it.

If we crate instability between the E and P layers of the atom and feed it from the mass vibration level, rather then from the outside, then we have our generators right there in the metals of the device, and at the SF level we can then turn it on and shut it off using smaller scalar coils to steer it at very low power, if not our own mental abilities projected to do this as the telepathic races would use.

A saucer craft that needs an operator to activate a mediator field frequency to turn it on, could never be stolen by a lower level civilization.
I have diagrammed how this is done.

It is right there in the experiment with the SS container, tapping it into the 333000 background field. This can be done mentally, as well as with the calipers. The use of a mediator, operated using telepathy, would be very hard to back engineer by a non telepathic race without scalar coils and F gens to do a scan. However using the scalar coils they can eventually cipher it. Then they will be faced with the difficulty of shutting it back off without comprehension of the TDF geometry! This is comical, and probably what they faced back in the 50's when they had some of these craft, but had no understanding of the Tempic field operation methods.

Anything that powers from the Quantum Field Fabric will work in the same way! You need a comprehension of how the Field creates matter and energy, in order to turn it on and off.

Using the Mediator Field

I have handed this to the public for those who can feel the energy of vibration, and they can easily now see how it works first hand.
This is how to activate a saucer craft, that is designed to fool civilizations that are not yet aware of the Tempic field or it's conscious aspect.
That was exactly where I got this from, scanning the saucers on 4th density.

I am most curious to discover if this field will come up for anyone who is not sensitive, although even a non sensitive should be able to feel it at the center of the can where the energy all converges, after it does come up.

And also using the equation mm = khz one can activate it using a scalar coil and F gen, without having to use the perception ability.

It is hard for me to do an experiment without using my sensing ability even if another person is in the room doing it. This is because if I connect with it consciously it will work either way. I would have to leave the area and not think about it, to see for sure. However that would be a really good one to use to experiment with that. To see if a non sensitive can raise up that field of energy, either with caliper or scalar coil F gen without me present energetically.

This energy system responds to 4th density manipulation, and so I do not even have to be there to make it work. I just have to pull my energy in and not know when or where it is being done.

This was Keely's problem also, as I have read.
Does the scalar coil hand us the solution to that problem?
In all their work I have never found reference to a mediator field set up to control a device, or using a scalar coil to target it / to turn something on or off. Yet this works!

That is probably the most important document I have ever written as it unlocks control, handing us an instant on/off ability.

In theory we wind a coil system with a E/P ratio to the frequency inside the SS can, slide it down in there, and then use the scalar coil to turn it on and off, then have it power an LED or something, and there would be your proof of vibration to EM.

The experiment on video would then be quickly debunked as others would fail to get it working, as they could probably never get the coils accurate enough physically to work, or understand the conscious part of how to activate the can. Best guess.
We use carbon coated wire in the coils to have no resistance.

A 90 degree coils system like that would have a center of gravity we can then manipulation to increase the tension on the E/P dance in the electrical system.

Having traced all this all the way back to the Source Field, at each step, even knowing all that, could one get it working without the sensory ability to measure it for accuracy and troubleshoot it if it did not work? I do not know.
For those with sensory ability and electronics knowledge it would be very simple to get working if the design is correct.

The major hurdle to all this, is sensory ability, vibration sense.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Free Energy

This is how we breech the Quantum Field Fabric, and start to use it as a source of power.
The lessons start out very simply with opening to the possibility of "feel felt" exploration of a quartz crystal.

How to feel where a resonance forms at a specific distance between the fingers around a crystal.

Then we take a quantum leap, and show how to measure that frequency using calipers or scalar coil F gen.
This opens the door to calculations and quantification of the new energy form that is all around us all the time.

http://www.resonantfractals.org/Doc/1index.html

The next 7 years will pass whether any take up this path or not. Where do you want to be in 7 years?

I am not aware of anyone else handing this directly to the public, but I can always hope it will continue.
Try some of it and realize there is no hurry. Wilbert Smith stated it would take 10 years, but I do not believe that is the case anymore.
Since we have placed this now into the awareness of mankind, it should come faster.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
One More Example of troubleshooting a device remotely

I hosted a group called the CSSP. Crystal Scalar Support Project.

We were all experimenting with some of the stuff Kosol had opened us to and having a lot of personal experiences with these.

When I designed the RM-1, others started to build them. Most were not built accurately, but many did work at lower energy levels.

One of our members had made a pretty nice one but it did not work at all for him. Tuning the F gen gave no feel felt energy to the sphere.
This person however was one of our best sensitives. He lived over in New Jersey as I recall, and me in Alaska.

I then did a remote scan on it from a photo, and instantly felt the coil was opened, I even felt where it was opened.
The energy itself told me this, and with spherical sense turned on I got it all at once very fast.

He then turned the unit over to discover a broken wire to the main coil! He was not an electronics person who could have found that with a meter, but he was able then to fix it and get the unit working.

These kind of senses are 100 percent accurate when applied to the sciences, rather then the emotions! I have so much evidence of this it is amazing that so many will ignore it.

Our culture thinks of these senses as mystical, wonderous, angelic, or demonic, but the last thing they desire to hear, is they are very technical. LOL!

The universe is so busy setting up the physics of all this, IT has no time and little interest in what we do with it. IT handed us consciousness to be responsible at our level of dimension, where "free will" can exist at the frequencies we have access to.

The best sales people in the world know that if they can get the buyer emotionally hooked they can sell them anything.

Technical people tend not to feel anything in the emotional spectrum, and so also block using that spectrum for science.

The average person with a higher education, will learn to switch between the two sides of the brain, but never do both come on simultaneously.
Emotion or Logic, but never do the two realities ever converge. That was where I was many years ago before I began the martial arts and yoga style experiments on myself.

Feeling vibration can at first be very emotional, as an experience.
Learning to keep the logic on line during the feel felt experience to create a coherent field on the brain that can see all at once, must be learned.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Free Energy Begins at the Quantum Field Fabric Level

A good summary of this thread then, is the main flow from Source to Load of a free energy system.

All free energy systems, which are fully reliable, and never wind down, begin with tapping of the Quantum Field Fabric, and some means to access it.

We discover that any form we can pull up from it has a corresponding distance in space, which also then contains a marker frequency, and that frequency is equal to distance, area, or volume, depending on how the form is powered. mm = khz for direct experiments with scalar coils, where frequency can be set up extremely accurately to measure this, comparing it to caliper measurements which will also vibrate up when they hit resonance gap distances.

Through the use of fractal octaves, using 8x multipliers we can expand these forms of energy and maintain the power of the fields.
Using 10x octaves we can also detect them without the power present.

The first field to come up is one we can feel and sense as vibration, and it does not have an EM charge on it we can detect with any EM meters.
This first field can be used to manipulate gravity and inertia.

The next more complex field uses spin to create voltage charge, and here is the beginning point of our current electronics systems.
ESR and NMR is now possible to work backwards using EM tools, to understand how EM effect the atoms.
Electron shells operate at Ghz ranges, and Nuclear mass operates at Mhz ranges.
The conical motions are discovered here in this technology.

By adding the vibration understanding we can then use the data of Isotopes to access the nuclear strong force.

From these we also locate the ratio of frequency always present between the Electron and Proton in all atoms at all times.
This ratio can be then be applied at larger dimensions then atoms and used at the circuit level to create Self Sustaining EM devices.[Floyd Sweet]

The source of energy is then moving through the atoms of the copper in the circuit, or any other element we would choose to introduce to the circuit for vibration routing.

NMR also hands us the important of coils at 90 degrees to one another, which have been used in many free energy devices but were first used in NMR in a practical way for measurement purposes of detection of elements.

Once we have the Source converted to EM, and discover that EM resonance is not the end all we expected it to be, but that powering in copper always has a 90 degree frequency and phase split inherent to it when under load, we stop trying to fix this with capacitors, and instead just capture it with two coils at 90 degrees, then we can drop all the EM resonance that is not a stable form of energy.

An EM resonant circuit may change frequency as you bring a hand near to it, and it certainly does not stay resonant with a changing load condition on it. EM resonance simply gives a preview of Tempic field vibration resonance which is very stable.

Tempic field does not run out of energy or change frequency when tapped into. In the atom config it will respond intelligently to stabilize and recover itself. Counter or back EMF is the result of the strong force flaring up to counter the disturbance on the electron shell, and pull it back into its stable arrangement. This reactive energy is not EM, it is inertial in operation and comes from the nuclear mass of the atom.

NMR modified by vibration work, hands us the NVR frequencies of the elements at the isotope level where they are generated and never change.
We discover the Isotopes are powered from the lateral surface area of the conical forms they manifest as, but we bring them up and control them from the various linear forms of height, base, and side lengths using mm = khz conversion.
 
Thus we can use much lower frequencies, and get back far more energy then it takes to bring these fields up.
They are so easy to manipulate with small vibration power, that our own brain can do this also after we teach it to scan up and down the band accurately.

Most every field can be activated using a single linear form distance in space or corresponding frequency generator into a small scalar coil at milli-amp levels.

The Tempic field which will come up around the device in the air, is the Source of power that will keep feeding it forever until it is removed using a TDF Take Down Frequency. This is an inflow of energy that never stops. It does not come from the manifest environment, it comes from the same Source that manifests the environment! This is a much deeper level, one that Max Planck discovered and quantified.

Dave L

   
Group: Moderator
Hero Member
*****

Posts: 557
Science already found all of this.

It was likely in the 40's or 50's where some started to put all this all together and we saw the flurry of self powering devices, that all, one at a time, got shut down.
 
Memorizing what we are taught is very different then thinking your own way through the flow of power into this reality. The power to reason, and then to comprehend, hands you the power to use it intelligently.

An example, in Reiki arts I had a teacher tell us all, if you wear a wrist watch the energy will not flow through that hand.
It certainly did not for her anyway. I however decided that if that were true the hand would die, and so it simply can not be true so I put it to the test.
I discovered that powerful flows in Jin Shin Do acupressure treatments could stop a watch form working, but it certainly did not stop the flows through the hands and fingers!

Electronics is taught in the same way, with all sorts of assumptions made by teachers who have no understanding of the atom at the physics level.
Diamagnetic energy comes from where? The electron shell pairs! Total nonsense. I challenge anyone to set up electrical coils that can repel both poles of a magnet when energized. A single piece of Bismuth or even thick copper will do this.

Diamagnetic field is inherent at the nuclear center of the atom to keep the electron shells from crashing into the nucleus, and this is a no brainer.
Every electron shell has a North and South magnetic pole, as ESR reveals clearly. These can hold either polarity with the Proton shells. We can turn the nuclear mass over in NMR and it will be stable in either orientation. Opposing or attracting magnetic polarities between them. EM cannot explain that force at all and no one can set up electrical coils to make it work that way.

The lie in physics is that no one understands why the electron shells do not crash into the nucleus of the atom, but EM is all that is present from the edge of the strong force moving outwards. Lets pretend that EM is somehow magical at that level and not worry about it!

The sensitives have already identified the diamagnetic field as where they can tap into it consciously. I believe it was the Silva mind control teaching that stated this and I had no idea at that time why it would be related.

All these powerful vibration devices raise up that field and create larger coherence of that field to create the forms of energy that form around them. Energy that can reduce the air friction of a car and release the pull of gravity and inertia!

If one had seen the masters in China lift the red hot iron bars without getting burned on the hands, and knows the strong force that can keep the electron shells in orbits, it becomes very apparent that we do have mental access to this field consciously by what they have termed Chi in the Oriental teachings. I saw a video of this some years back, and it is used to inspire the newbies in the study of Chi [life force].

In another such video a man stuck his finger through a wooden table with a single blow, and later apologized as a splinter caught on one of the bystanders. He fully described the source of this power as the mixing of the energy from overhead with that of the earth from below in the hara area of the body.

Skin can only burn if the heat can effect the outer electron shells to cause oxidation. If the strong force stops that from happening by holding the electrons on more tightly, the skin will not burn. It takes them a lifetime to do it because they do not have the science part ciphered.
If however you work with someone who can do it, there is much faster advance due to your own negative belief systems, but also you can feel how they do it if you are fully aware on the levels of vibration sensing. It was passed on from person to person in this way much faster then one starting out with no teacher. It mostly then stayed with the families that had these techniques working.

We have also seen human levitation in some of the older cultures in Africa and India where walking over hot coals could be done after long Kundalini meditations to bring up the field coherence on the body. They would dance for hours with the drums beating constantly, and then start to perform this stuff. I have seen two different videos of levitation, as well as the walking on the hot coals. People will try to explain this, but if you ever tried touching a red hot coal, those explanations fall very short very fast.

Up here the natives would use the drums and then they would raise a totem pole. Many of these old totem poles are extremely heavy made from very large trees.

Anyway, all that exploration tends to make one realize there was a lot we did not understand about the physics of the atom or how to access the force it uses to constantly regenerate itself.

Realizing the strong force in the atom can be tapped into and expanded exactly like we do now with the magnetic field on the electron shells of iron atoms, and it will form into larger coherent fields of much stronger energy level then we are familiar with manipulating, offers us the science behind ciphering how it works. The mystical is tamed, and all the emotional stuff seen through to what is behind it that works.

From ghosts, to aliens, to flying saucers, it is all tamed, because we can now create for ourselves a "mental model" that reflects how the universe actually works, and it can then explain all this to us in a way that our mind can come to peace with it.

Including "awareness" in the physics at the starting level, hands it all to us. Thank you Wilbert Smith.

Understanding the levels of our own conscious field also changes everything, that we can map the other levels using the vibration sensing ability and prove to ourselves we do have a body on 4th and on 5th, and it was always there even before entering 3rd. Scalar coil with F gen brings it all to life in a repeatable way because then the frequencies can be recorded and referenced.

Exactly as we can scan an unknown metal and now identify it from the frequencies it vibrates up at, we can do this with the higher levels of our own consciousness. We do not have to shoot in the dark begging for results with pleas of prayers over and over to once in a while get a response that makes some measure of sense to the logic mind. Connecting with higher self is a technical process!
------------------------------------------

Tune your RM-1 to a frequency of 333000 hz using the F gen, and then feel what happens in the entire room. They you will realize that Bashar was telling us a truth! You will also then understand the power of a spherical transmission of platonic form energy.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Diameter of the Sphere sets the Field

This is a universal geometry that sets up Realms of reality.

From a very small sphere we can see how it works. 89.459 mm / khz will set up a sphere you can hold in your hands, and the local earth field will energize it for you.

Manifesting Form

The universe is set up this way as well, like the layers of an onion, as we were told early on.

We exist as physical beings in 3rd density, but at a larger diameter is another entire reality we call 4th density, and the difference is the frequency there is higher. Then outside this we have 5th density that is so high, we call the beings there light beings.

These dimensions are not anything we can change, as they sustain the various realities.

Some time back we have something called the Tesseract, attempting to show a 4th dimension is possible, the mistake was to make this drawing using a cube. This is not the case they are all spheres.

When we can see into two different realities simultaneously, the next one gets overlaid on top of this one and we simply start to get more information at greater depth of field.

This is absolutely technical.

As all calculation of volume is done as cubical expression, the cubes can represent this, but the spheres is what is real.
cm cubed, is used for the volume of a sphere.

However the most important dimension is the diameter of the sphere which is the control system.

All form is controlled using a line with a distance, and the field will then bring up the specific form being addressed.
So not all distances will bring up a sphere, they are very specific distances, metrics of the universe.

Same with cones, the cone height, side length, or base diameter, which are all just linear form lengths of very specific distances, control the manifesting of the form.

Same with circles, in the 2D level of electric field. While if we make a square that is fixed to the field and cannot move, we then calculate the diameter of a circle with the same area, and that diameter will manifest the circular form that can now move through space and will not be locked into a specific location of the grid system we happen to be inside of.

In meditation, as we hit a next layer out from our physical world, we experience this great depth, hard to describe, but it includes all the emotions that others are feeling simultaneously with the physical. Many sensitives have to shut this off, and learn to control it, as this is normally overwhelming. But if you are alone or with only a few people in good spirits, it is an amazing thing to experience.

Over time the 4th density body will start to "learn" what you are asking it to do and open only what you focus on opening.
So in a sense the astral body learns and can be trained exactly as the physical body is trained, but the best communication is not serial language.
It is intention, targeting focus, and pure curiosity.

However before the belief in the astral or 4th density body, IT will work to hand you emotional experiences behind the veil of deception.
You will be the slave of your desires in the physical, for the most part, like the donkey being led by the carrot on the stick, you never seem to get exactly what you are asking for, but on the path you start to learn what actually need.

It will tempt you, and as you then seek what you desire, you will get something different along the path you are pulled into. We call this the plan, or the 4th density karmic interaction. The plan can also appear in the dreams, if we establish a dream journal, and record the dream flow as we wake up in the morning. There are many dream layers, in some we can levitate, in some we can accelerate along the ground but not quite get off.
As we wake up we are consciously sucked back through all the layers and back into the physical awareness. However in the deep sleep, we are in the 4th density astral level making the plan.

The point is that every night we cross over, and for about 2 hours in physical time we enter the delta frequency at the physical bran level, but our conscious awareness moves into a higher frequency sphere where we set up the plan with others what event stream will have the most meaning to the most people.

Ones without this awareness, will never believe they are participathing in making the plan, as they will only be aware of the physical as it plays out.

4th density time flow rate is very must higher then 3rd, and in that 2 hours of sleep we can channel entire books of information, if we could bring it all back with us. At best we may be able to bring back one thing we have been seeking to reach comprehension of, until we learn the Za Zen technique to do this while awake, 1/2 in 1/2 out.

That connection is always there. But simultaneous operation in multiple levels must be practiced.

That is the first level is to learn to keep the logic mind function present during intense emotions.
But this is only the first expansion. The emotional healing process if you will, then it gets better.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Fractal Access

Pushing the physical brain up into the 4th density is a painful idea. It is not designed to operate there really, but if it is in a containment system where all the pressures are balanced around it then, it can do this.

We do however already have a body designed to work in 4th density, and communication can then be channeled into the physical brain using fractal access at lower harmonic frequency. 8x hops to downshift the frequency, and your own 4th density body can then travel anywhere and send you back information, as sensations, and frequencies you can then measure. It can also sense pictures in 3D with complete 360 degree perception.

99 percent of the phenomena I have examined is generated by us, or the animals that live on our world. A game with our own 4th density body through the veil of deception.

Most alien contact I have had, these beings have no interest in our world at all. Our level of culture with politics and conflicts is not something they even want to be sucked into. They find it very distasteful to perceive, as they have 4th and sometime 5th density perception always turned on.
The CE5 protocols have been working for some, but the experiences are mostly 4th density phenomena, and it may be hard to tell if it is our own 4th density body manifesting these things, or an actual alien contact. Usually the "content" of the messages will reveal this.

That is most Aliens can read our minds, emotions, and intentions, at 4th density time flow rates and get it all at once.
Having accurate telepathy, creates a different sort of civilization, where secrets are impossible.
They see us as living in a state of deception by choice.

Where we do get accuracy is with the technical parts, and even with other cultures out there whom might assist us with technical methods if we only call on them.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Tools of the craft

Tools of the Craft

These are the tools of mass vibration sensitivity.

They are the fastest method I can offer to find a first frequency that you can feel as a resonance inside the body.
You can use them to scan the entire bands of human consciousness, and there will be at least one you can find that will vibrate up somewhere inside your body that allows you to then focus in and feel how this works.

From this beginning point, you can then play with opening to more frequencies, as the sensitivity is natural and will take a course that will then start to open the awareness more and more. It is like discovering you have eyes that were never opened from birth.

You can test yourself for accuracy, record frequencies, and also share them with others.

We can then get to the point of verification of the physics, and be able to prove it to our self.

------------------------------------------------------

Proof

Set the SS calipers to 5 mm, set the scalar bismuth coil and f-gen to 5 khz.
Clip the hot wire to the calipers on the back end, and start to move the distance back and forth over the 5 mm point, recognize there is a peak of energy all down the calipers when you are exactly on 5 mm.

Next turn the knob on the F gen back and forth over 5 khz and feel the same peaking.

Set the calipers then to 6 mm, and verify it resonates up at 6 khz.

This is personal proof positive that in the gap distance of the space, the frequency rises with greater distance.
This is a hard one to comprehend for EM trained people, as it was hard for me to accept also, and I wasted years not trying it due to EM belief systems, which are actually a load and not a source.

EM is a load, mass vibration is a source, they are not calculated the same. Without this personal proof, comprehension will never be the same.

-----------------------------------------

While you can experiment with the F gen and calipers without using the scalar coil, and it will work, by using the scalar coil with aluminum wire probe to touch the calipers, the vibration power will increase tremendously, even to a point of the arms starting to feel electrified up the nerves which are sensitive to this new energy form.

When it starts to work for you, then you can set the coil system up vertically and place the calipers around the aluminum wire and move it up and down the wire to locate nodal positions for the frequency you are using. Say you are using 15 khz to feed the coil, you will find high vibration nodes at 15 mm apart up the Aluminum wire. This will then begin to verify for you the segments versus node of the energy form, and that these distances are fixed and stable, much more stable then any EM field.

These small experiments will then begin to impart a feel for the kind of energy originating from the Quantum Field Fabric, and begin to show how it can be quantified and measured in two ways with great accuracy.

-------------------------------------------------
Why is it that people with a more spiritual nature seem to find this easier to experience?
They seem to be more opened minded as to a path of creation, but few of them are opened to adding calculations to this energy form.
Imagination will take you out of the present moment, and add all kinds of dream level interpretations, but a frequency is simply what it is, how your body reacts to it, must also be part of the observation of the science.

The simultaneous awareness, how it makes you feel, and yet mentally observing this, will establish the coherent field on the brain, which can then vibrate up as one coherent field on the head. You are then your own meter and detector of the Quantum Field Energy Source.
There will be no more fantasy or off shooting ego mind theories you have to deal with ever again. You can prove everything to yourself, and no one can take that knowledge away once you have comprehension of it.

There is energy all around us all the time, and this will no longer be a theory or speculation.
It will become your new reality, because it works.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
DC voltages

As the sensitivity grows and expands, and it will, you will begin to realize how the volt was likely calibrated, in the time before O scopes and volt meters.

You are in a time where no one has any electronic test gear other then the compass and a lot of machinist tools around.
You are experimenting with an unknown we now call electricity, and trying to make logical sense of it.

You discover the interaction between a magnet and a coil of wire, but want to somehow quantify it so the data can be shared with others accurately.
You started to make batteries of various sizes and voltages, and noted that more cells produce stronger effects.

Facing the unknown with only your machinist tools to build things, measuring wire length, etc, how do you calibrate a meter deflection to share the value with others. You use a caliper to measure the voltages of the cells and discover that more energy is felt in a lager gap distance of the caliper.

The caliper is metric, and so you start to measure your cells in strings, none of these are exactly even voltages, so you then extrapolate the data, and come up with 1 vdc = 1 mm  where you feel the calipers vibrate up. The first resonance discovered then was more likely a mass vibration.

The caliper was the source of the measurement as it was all they had while facing the unknown with an opened mind.
They then calibrated a meter with marks to measure now what they observed as the power of the field force that is now called electricity.
The scale matched what they felt from the machinist tool.

After the science progressed the physicists came up with the electron and calculated the coloumb which could not likely actually be measured.
However by then the volt was firmly determined. That is most likely why it matches the caliper measurement today. Best guess from intuition.

With the advent of the electronics tools of measurement, people then lost the opened minded feel felt probing of the caliper to measure electric field force.

After this then the wild theories began created by people who had no comprehension of feeling vibration using the caliper.
The errors in the notions of eddy currents and back EMF began as assumptions that were never tested fully.

The force that resists a change in current is not an EM force at all but an inertial one, and the man who wrote that first law, never stated it was.
He stated that as we set up a changing EM field in a coil, there is a force that opposes that change. He never said it was a magnetic force from eddy currents because it isn't. It is a nuclear inertial force.

The people who lived in the time between these developments did however understand it better. Many were making free energy devices already just after the work of Max Plank and quantification of the frequencies found in the Field Fabric.
They had most likely experienced both caliper measurement and the later developed volt meters.

The physics, and the electronics were then separated into two different disciplines, and nether did they ever then share comprehensions between them.
Many assumption, and lies then proceeded to fill the technology, and it became entropic at every level of teaching.

Study of the atom, was never taught in electronics which is study of the electron proton shells interactions but only the flow of electrons was accepted as real. The older ones labeled the electrical power as the flow of the positive charge, which actually provides the power of motion. The flow of the electrons produces heat.

By the time I was being taught electronics, they only spoke of electron flows from negative towards positive. Thus there was no way to understand how electricity can produce motion. Yet in the right and left hand rules it was obvious motion is produced, and the concept of the quadrature field forces was limited to only these two rules with absolutely no depth of comprehension into the atom at it's deeper level as even Wilbert Smith had a more complete knowledge of.

The notion that a wave can travel directly straight through the mass of the copper atoms, without having to take the outer circle around each atom was lost. Tesla found this and it was totally ignored. The velocity of this wave was pi/2 *C, faster then a transverse wave can travel as it must move side to side making its path through space much slower. Tesla was using mass vibration technology in the very beginning, what used to be called the "A field."

Because in the beginning they knew what Planck had discovered, all the energy came from the Source that is everywhere. This was dropped due to its spiritual inflection, that maybe God was not a man on a throne that even cares or thinks about what we do at our level of this creation system.
Consider these men were surrounded by Christians with very fixed belief systems, and not ready to believe in a Quantum Field Fabric as a Source of all the energy inside the universe. They did not want to stop believing there is one God out there that babies mankind and provides us with everything we need.

Mankind takes a step down in importance when we discover the Field Fabric is blind to what we use it for, and will power anything we set up correctly, no matter where we set it up or how hard we pray. Prayer helps to focus the mind but the Religion part hands us fake answers that bypass the reality of existence in this physical universe. Religion is constantly having to change, due to the accuracy of science. If any one religion was based in absolute truth, then everyone would find it to be "self evident" and there would be no more wars over it.

My perception then;
Tesla, the man who discovered AC electricity, and measured the velocity of the T field wave at exactly pi/2 c, was not widely accepted, most likely for the implication it would have on Religions of the time, not simple the economy.

Planck whom quantified the Field Fabric and modeled it perfectly, had parts of his belief system also suppressed for a similar reason.

They both knew the Eastern Religions had a part that was deleted from the Christian Religions. God is everywhere. Or basically the energy that powers this physical universe must be everywhere, or it would not work as it does. Then we, as those guys did, as we begin to interact with this new field force, begin to realize it has intelligence and form built into it already.

Mankind could accept the Electric and Magnetic field forces [The entropic ones], but could not accept the field force that is the Source of those two, or how it can be manipulated by each one of us, when we learn how.

Both the energy and the intelligence is all around us all the time, and we do not have to go out there anywhere to seek it out. It is with us already.

As we come to program quartz crystals with field bubbles that can fill a room, we realize the frequencies of the Source Field are even inside all matter already. They exist both inside and outside everything. They are the fabric that supports everything.

Realization of this as a science will change our belief systems drastically.

Once one has this proven to them, the works of the people coming before us all come into logical view.
Walter Russells cones [Isotope Fields], Tesla's faster then light waves, T field [mass vibration], Plancks uniform Field Fabric [either medium mental model] Hendershots ability to wind a coil to resonate perfectly at 500 khz, without using any meters, probably calipers, and make model airplanes that kept working when the propeller was spun up. Floyd Sweets ability to intuitively find the E/P resonance.

These are things we can prove to our self, by reclaiming the feel felt part of the work, with very simple tools.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Wilbert Smith

From the logical presentation of the three field forces, in the paper "The New Science" we come to realize that all three of the field forces have underneath them a vibration frequency that provides the primal structure to support the ones that set on top of it.

We must first use our conscious awareness to observe these effects. So awareness is the first thing which must be present in the process of the creation of a universe. Wilbert touches on this psi phenomena in his work with scalar coils and others in his group who did get them to work in this way.
He stated if we would believe the boys topside, awareness exists at every point in this universe.

Next we have the Tempic field, relating to time, or time flow rates as we perceive them, and states our perception of time is not fixed at all.
This meshes with Planck and the notion that every field force has a specific frequency in it's appearance and there is a direct energy conversion available that can express it as a frequency. Plank theorized a quantum shell as the pixel of space itself, with a resonance, and proceeded to find numbers and data to prove that theory is most accurate. The concept that the fabric of space is being stretched out so hard that it can hold and sustain cosmic rays, as well as the nuclear strong force at any location in space. As he recognized it to be the source of energy at any point in the universe.

As we now set up fields at 90 degrees we proceed to construct the universe as it appears to exist now.
However from this new system of belief we can come to specific conclusions and prove them to ourself.

A voltage is a tension, which has a specific frequency of resonance, and can be measured using a SS caliper.

A distance in space holds a tension, a frequency that can also be measured using the resonance between two flat plates at correct distance.

All the forces of known physics can be reduced to the three field forces, if they had not been all given different names. Wilbert Smith.

Nissam Haramein and fractals; Walter Russell and linear versus area measurements; Wilbert Smith adds volumes.
All these can be converted to frequency measurements.
Once converted to frequencies, they can then be linked in a chain to feed directly from the Quantum Field Fabric into and back out of a device using mass resonance effects.

The calculations are geometric. Space = frequency = energy.
These calculations have been shown to work in direct experiments with mass vibration techniques, which reveal it all.

However we must develop an accurate feel for the three field forces and their construction in order to design devices that can work every time.

The Law of Geometric Expansion
Smith and Russell

Strong Force

Dave L
   
Newbie
*

Posts: 27
My meters and scopes just see dead space.

658.20222 Ratio  V Electron  / V Proton
/4  =  164.550555  E/P
/4  =   41.137638  E/P  [Floyd Sweet VTA Turns Ratio]
/4  =   10.284409  E/P  [100 watt experiment Turns Ratio]

My opinion on your E/P ratio. The old  autotransformer Adjust -A-Volt type 500B-7,5 A has a ferrite or iron core removed. The number of turns will remain the same.If you operate such a autotransformer in the U.S. electricity grid 120 V/60 Hz, there may be 2 options. 1. When connected to the electrical grid, a short circuit occurs and the autotransformer is destroyed. 2. The autotransformer will work but will flow through it so large a current that it will be destroyed by heat overload in a few minutes.The impedance is composed of ohmic  resistance and inductivity. If iron or ferrite is missing from the core, the Impedance is approximately equal to the ohmic winding resistance.So what is the ohmic resistance of your autotransformer?
   
Group: Moderator
Hero Member
*****

Posts: 557
My opinion on your E/P ratio. The old  autotransformer Adjust -A-Volt type 500B-7,5 A has a ferrite or iron core removed. The number of turns will remain the same.If you operate such a autotransformer in the U.S. electricity grid 120 V/60 Hz, there may be 2 options. 1. When connected to the electrical grid, a short circuit occurs and the autotransformer is destroyed. 2. The autotransformer will work but will flow through it so large a current that it will be destroyed by heat overload in a few minutes.The impedance is composed of ohmic  resistance and inductivity. If iron or ferrite is missing from the core, the Impedance is approximately equal to the ohmic winding resistance.So what is the ohmic resistance of your autotransformer?

Thanks for this info Philip!

Looks like you may be right on this one. I just measured 1.7 ohms, 108 mH with no load connected.
Any way to estimate what sort of core it has?

Did you find documentation on the old unit?

I will have to make corrections in the documents.

100 watt experiment

Thanks for your assistance, accuracy is important!

Dave L
   
Newbie
*

Posts: 27
My meters and scopes just see dead space.

658.20222 Ratio  V Electron  / V Proton
/4  =  164.550555  E/P
/4  =   41.137638  E/P  [Floyd Sweet VTA Turns Ratio]
/4  =   10.284409  E/P  [100 watt experiment Turns Ratio]

David your autotransformer has an iron or ferrite core and it does not work as you write in your paper with a 100W bulb.I did the calculations and if your autotransformer were to have an inductivity of 108 millihenry with the air core, the winding would have to have a length of about 2000 metres with a mass of the winding of about 20 kg according to the diameter of the wire.The inductivity of the wire itself without the core is about 2,2 milihenry/39,338 metres. This information is from the technical documentation of the audio coils. Why are you lying?
   
Group: Moderator
Hero Member
*****

Posts: 557
David your autotransformer has an iron or ferrite core and it does not work as you write in your paper with a 100W bulb.I did the calculations and if your autotransformer were to have an inductivity of 108 millihenry with the air core, the winding would have to have a length of about 2000 metres with a mass of the winding of about 20 kg according to the diameter of the wire.The inductivity of the wire itself without the core is about 2,2 milihenry/39,338 metres. This information is from the technical documentation of the audio coils. Why are you lying?

I have corrected my two documents.

Electron Proton Ratio

100 Watt Experiment

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
 "Why are you lying?"

I hope I have fully explained the difference between a tweaker and a scientist.

Back when I did that experiment and got it to work, I was tweaking by feel.
The Autotransformer is much lighter then a normal transformer with laminated iron, and I made an incorrect assumption.

I just now did the scientific measurements on the unit and discovered the truth for the first time, and then made the correction in the two documents.
Use the F5 key to update your browser and it should show the corrections.

I always strive for accuracy, and appreciate any input to make the documents more accurate.

A lie denotes deception, an incorrect assumption is very different.
I did however list the model number of the unit.

Dave L
   
Group: Moderator
Hero Member
*****

Posts: 557
Unexpected phenomena

As I made clear in the document a new phenomena witnessed is the Wizardry, and science has to catch up later after the phenomena is witnessed and believed in.

The 100 Watt components did not come from me either, they are right out of Floyd Sweets material. And the 100 watt threshold comes from both Wilbert Smith and Floyd Sweet.

Sweet Related Diagrams

Torsion Field Lock

Floyd Sweet was showing a new phenomena that electronics people would deny is possible.
It had 90 degree coils with the E/P ratio of turns, and it also had the variac and light bulb to draw a load.

I got the same components to experience the same phenomena.
It changed my belief system.

Dave L

   
Group: Moderator
Hero Member
*****

Posts: 557
Floyd Sweets Magnets

Another interesting note from Tom Bearden's videos of Floyd Sweet programming and then showing how the magnets work.

The magnets end up with one pole turned inwards as a center node, and the other pole pointing outwards all the way around it.

This is the same magnetic polarity I used in the Scalar Bismuth coil system, and in the Rain Maker base.

Although many people studied the Sweet VTA, I am not aware of anyone who got anything he showed us to work back then.
However I got a great deal from the study of it.

What I can now state is likely the case is his upright large coil setting under the magnet was bifilar and scalar cancelling, as that is the only way he could have gotten a magnetic pattern like that on his Barium Ferrite magnets.

He then also placed a normal coil of wire down inside that coil to place the AC frequency into the magnet.
The video shows him programming that frequency into the rectangular magnet with a steel rule setting on top dancing as he hits a resonance.
He said he could program the magnets to any frequency he wanted to use for the output of the system.

I likely still have that video somewhere around here.
The system produced cold electricity that he was frost bitten from once on a finger.
The weak point of that system was the magnets tended to crack from the stress over time, making a loud noise and then failing.

Dave L
   
Pages: 1 2 3 4 [5] 6 7 8
« previous next »


 

Home Help Search Login Register
Theme © PopularFX | Based on PFX Ideas! | Scripts from iScript4u 2025-12-18, 23:42:15