Hi everyone,
I'm presently attempting a replication of Erfinder's multi-strand bucking generator coils which he has demonstrated in this video: http://vimeo.com/117820507
I bought the 7 strand Litz = 10 gauge wire used on ebay.
The finished coil measure 2"1/4 wide x 2"1/2 diameter. The core is transformer laminations and about 5/8" square.
The bobbins were wire spools with a round center but I used a heat gun to soften the center to fit the square core and re-shape it to fit.
The pic shows the build at this time.
Luc
I wish you would have asked more questions before winding your coils. I don't twist my windings, I don't because of the effect twisting has on the parasitic capacitance of the coil. I mentioned this ages ago on the energetic forum with relation to being able to manipulate the inductance of a triflilar coil, this was back in 2010 following the big Ferris Wheel presentation.
So that its a fair comparison, I highly recommend you, and I am not sorry for having to point this out, wind new coils which aren't twisted, and as a prime mover, you should use a PWM driven pulse motor. I have seen your replications of other devices which show similar result, and in all of them you used a prime mover which I would never even consider.
The effect can be had with a single coil, I will be demonstrating this soon using one of my old two coil pulse motors, the motor and drive coils are identical. Both motor and gen coil have welding rod cores, each has:
6 strands of 18AWG
6.5mH @ 0.6 ohms (6 strands in parallel)
I have shared this concept with one of my German friends and he immediately got the effect, so if you and others can't demonstrate the effect it matters little to me because he did, all I need is one to see what I see, I know that in time others will as well. I am also dusting my insanely large 12 coil pulse motor and making a few modifications on it so that it to will produce this effect, using 2x of its trifilars as motor coils, and the rest as gen coils which will supply a huge transformer based reactor which amplifies the effect. This will be demonstrated in two maybe three months, I have other priorities, and when that is accomplished, I will post it for all to see and at that point officially don't care if others can't accomplish the same or similar, because at that point the effect was demonstrated 3 times in 3 different machines.
I will keep my fingers crossed and hope that you get it to work.
---- Added ----
Almost forgot, a replication isn't what this is, honestly I don't know what this is, I am oblivious as to what your goal or motivation is. Like all attempts to copy, they all usually lead to folks plugging the device into the scope and looking at meters, and programs for calculations. You don't see me doing this, if and when I connect the scope its to show you a wave form, and not to ascertain whether the system is giving back more than is being put in. I have no interest in such childish things. If you or anyone else turns this into a game of numbers, know that in doing so, you miss the point. I am not looking for more out than in, I am looking for something far better. The way I see it, and I am deluded, I don't care. I am looking for the drain plug which coils are an embodiment of, once I have found it, I will establish those conditions whereby the blockage is removed, allow that high pressure condition which exists both outside and within the system to equalize, if this system is allowed to oscillate, referencing itself, or a mirror image of itself, I will be the happiest person on the planet.
I am not on the beaten path I desire more than the mediocre, there is more going on between and about those turns than I am qualified to even contemplate about. My lack of qualification makes me the perfect man for the job, using the only tool I have, my intuition, and as inspiration, my dreams.......I will find what I am seeking, I leave you with the following words:
"HAD I the heavens’ embroidered cloths,
Enwrought with golden and silver light,
The blue and the dim and the dark cloths
Of night and light and the half light,
I would spread the cloths under your feet:
But I, being poor, have only my dreams;
I have spread my dreams under your feet;
Tread softly because you tread on my dreams."
W.B. Yeats (1865–1939)
Regards