PopularFX
Home Help Search Login Register
Welcome,Guest. Please login or register.
2021-12-07, 21:55:03
News: Registration with the OUR forum is by admin approval.

Pages: 1 2 [3] 4
Author Topic: Quantum Field Fabric  (Read 1687 times)
Group: Moderator
Full Member
*****

Posts: 107
The RA fractal and the Field Fabric

The RA fractal in a copper pipe cut accurately will vibrate up anywhere on the planet.

It is a direct derivative from the Field Fabric.

333000 / 150000 =  2.22 ratio

We can program this field into a quartz crystal using these two frequencies [lengths] at 90 degrees to one another and have a crystal that pumps out this RA fractal frequency.

150 mm off the hex sides of the crystal and 2.22 mm off the tip, move the calipers slowly to feel this field come up around the crystal.
It will self sustain this field forever until a crystal clearing frequency is used to clear it out applied at the center of mass location.

Quartz Beam

Palming a self sustaining vibration field installed on a large crystal is the absolute proof to one who is curious about this new form of energy.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Planck Length Fractals



Quantum Access using The Planck Length

An interesting method of bringing up a field that resonates with the Quantum Field Fabric.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
SEG

SEG Engineering and Physics Report

Been looking at this for a few days now, and this is what I came up with.

SEG Development


Dave L
« Last Edit: 2021-11-21, 10:14:01 by DaveL »
   
Group: Moderator
Full Member
*****

Posts: 107
60 Hz Power

There is a lot of confusion about how power moves down a power line, to move something in your home.

All electrical fields have 3 vector forces in Quadrature alignment.

We have the Electric field, the Magnetic field, and the Pressure wave [Tempic Field.]

In 60 Hz commercial power, these three are in a rotation that moves around a spherical copper atom.
As each one comes into alignment with the wires length we get a different flow.
People may fail to realize that the actual motive force is the pressure wave, and it happens at 90 degrees to both the E field [electric] and the B field [magnetic] vectors.

Note also that in this AC rotation the fields will also each come into 90 degrees of the wires length.

To prove that the pressure wave can extend outwards of a power line a very great distance, we make a resonant tool.
An Aluminum tube that is cut to 200 mm.

Hold this tube in your hand, approach a power panel, and point the tube at the panel moving around looking for a wire or flow that carries a load.
When you find one, the tube will vibrate up in your hand. It will peak when you point it directly at the location where the load is traveling through a wire of high AC current. You can start backing away from the panel and see for yourself how far out this pressure wave moves away from the panel.
If there is no load on any circuit they tube will not vibrate up, the higher the load the stronger the vibration will be.

This is a proof that the pressure vector is rotating in the wire of an AC powering electric system, and that it does move right through any insulations around the wire, and is not an electrical or magnetic vector, but a Tempic field pressure as Wilbert Smith details it.


Now if we observe the history of electrocutions, we realize that a high voltage negative charge to earth ground will burn right through a person.
A high voltage positive to ground, will throw a person across the room with no burns.

This is why in the old classical electronics teaching it is the positive charge said to carry the power of the energy, and not the negative electron flows that move in the opposite direction down the wire.

The positive charge is associated with the Proton at the nuclear center of the copper atoms, and Protons do not move down the wire. They are restricted from moving due to the nuclear strong force.

The pressure field however is the third vector that actually transfers the force of motion into a motor, or what ever load there is on the circuit.
The pressure field is the result of a nuclear spin force from the nuclear center of the atoms, not from the electron shells per say.
It is a nuclear Mass Vibration energy.

It is this energy of mass vibration that causes the Aluminum tube of 200 mm in length to vibrate up even 15 feet away from a power panel when pointing at a wire that carries a load.

This is also the kind of energy that can be used to set up a self powering system of EM power output.
Because it is a nuclear mass vibration with a frequency, it can be routed using vibration techniques.
It is also the kind of energy that holds the atom together and powers it, holding the electron shells at specific distance out so they cannot escape.

Now in electronics it was given a different name, the Lorentz force. This technology was not developed by people with the deeper understanding of atoms, and it was assumed to be a property of electron shells alone. But the force that resists electrons from moving off copper atoms is an inertial force, not a magnetic force or an electric force, and it operates at 90 degrees to both.

When you learn how to feel this vibration force, you can then begin to manipulate it as well as measure it.
This was what I was initially doing with the 100 watt experiment, where I managed to hit on the E/P ratio and discovered another force, operating between the 3 fields in all the atoms already.

100 watt Light Bulb - Self Powering Circuit

This document now references the E/P ratio document, as well as other experiments where one can set up self sustianing field only using the vibration vectors, and no EM at all. These show how easy it is to set up fields of vibration that totally self power.

Dave L



   
Group: Moderator
Full Member
*****

Posts: 107
Copper induction versus magnetic opposition.

If we set up two magnet such that they push apart, we can create a magnetic bearing, and there will be no friction between the two magnets.
There will be no inertial coupling, if we spin up one of the magnets the other floating on top of it will not spin up at all.
This is the action of the electron shell of magnetic elements like Iron, and Nickel. They have an extra Electron shell hook that becomes polarized as a magnet.

If we now spin up a copper cylinder, and bring a magnet up to it, we also feel the repulsion of the magnet from the copper in motion, but there is now a second force at 90 degrees that appears and it wants to pull the magnet along with the copper in the same direction of rotation.
This force is more powerful then the magnets in repulsion, as it can hurl the magnet across the room. This is also then a transfer of torsion or inertia from the copper in motion into the magnet that enters its motional field.

The copper has a nuclear hook, not an electron shell hook. This is a nuclear energy. It is 137 times stronger then a magnetic field can become according to physics.

It has been stated this force is a result of Eddy currents in the copper at the electron shell level, which is not true. There is no magnetic field generated in the copper cylinder that opposes the magnetic flux passing through it. Copper is not magnetic on the electron shell.

Once we realize that copper is Nuclear, and not Electron shell polarized, we can now move into the realm of Mass Vibration, and the pressure wave, to study how to better manipulate it.

When electric fields move through copper they attach to the nuclear mass and cause it to spin up. This is why we can get motional jumps and mass acceleration happening with copper lines during fast transitions of currents. The copper responds by generating motions.

As we accelerate a mass in space, there is a dragging force that resists the change of velocity. In copper we can manipulate this force, and change it's inertial qualities. Electric field are only one method, mass vibration is the other method.
------------------------------------------------

The mass of the copper atom has two isotopes that spin along a system of dual cones. Two cones with tips touching at the center.
These resonant frequencies can be manipulated. However is we align all of them in the same spin plane, we can reduce the drag of inertia along the plane of spin like a frisbee. We can cause them all to go into perfect alignment using either a scalar coil, or by cutting the copper to a correct length.

If we cut the copper to a fractal of the sum of the height of the cones of both isotopes, the spin plane will turn 90 degrees to the coppers length.
If we cut the copper to a fractal of the sum of the base of the cones of both isotopes, the spin plane will turn 90 degrees and the coppers frisbee effect will be along it's length.

We can actually do this using very low energy by placing a scalar coil on the copper and using an F gen to shift the angle of the dual cone spin planes.
This is method of inertial reduction, that is now directional. Specific frequencies can be used to manipulate the angle of the mass spin plane to any angle we would choose using a geometry vector to set up the alignment.

How do you think a saucer craft can do a 90 degree turn??? With no inertial drag.

In normal matter the spin planes are oriented in random angles so there is inertial resistance in all directions of motion.

This was shown by David Hammel in his work, and it does work.
---------------------------------------------------------------------------

Now if we want to create lift, as David Hammel did, we have to align the spin planes of two sides of an object to taper, so the spin planes will diverge on one side and converge on the other. He did this using an Aluminum cone system with the tips all pointing down.

The spin planes all aligned, they tilt outwards to the top, and we get lift.

Nuclear mass manipulation.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Levitation meditation

When one becomes sensitive at the nuclear spin level, we can now begin to play with making the body feel lighter.

In party levitation we have 4 people standing round a sitting person, generating these four angles upwards and outwards towards their heads.

All enter a counting system, with a state of joy and fun present, these fields cross through the person who is setting and he becomes very light.
They lift him easily using only two fingers each. It works, and the dynamics are really very simple.
I have had this done to me a few times, enough to know it really works.

Now this is a bit more complicated for one person to achieve, but it can be done.

One can become attuned to the nuclear field vibration system, by working with it one atom at a time, if you will to get into the zone.

Feeling the Elements

--------------------------------------------------

It may not become apparent right off how meditation can cause levitation for one person, but if you are using the mental model of tilting the spin outwards all the way around the center of mass of your body it begins to work.

This is the inverted cone that comes down from above to realign the nuclear spin of all your atoms mass.
The tip of this cone must come down to the center of mass of your body at the hara level at least.
You will immediately feel much lighter on your feet, and then one must begin to adjust to the disorientation of this mentally.
It may at first cause dizziness. Once that subsides, it can then be manipulated to create lift.

As all real power comes from the Field Fabric that creates the spin of the mass of the atoms, you do not have to power this effect from your own energy. You are merely bringing it all into one coherent field shape.

To pull downwards with opposition we then can bring up the cone from below. Where the two cross we will get much energy into the body.

Adjustment between the two cones, can teach one control.

This is a powerful meditation, and the fastest one I know of that will hand you a meditation for levitating, and with the detection of the elements, do it on the correct level of dimension for it to work.

Most of meditations that work are all about finding the correct frequency!
Now days however using this technology we can get a preview of how it feels to align the mass spin, using calculations and various specially cut metals.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Advanced Chi flows in Martial arts

These energies come from the atoms of the mass, and when you become more attuned to them you can manipulate others at distance.
This is the mastery of the TaiChi master.

When a person is attacking you, you can reach through them with your mind and change the angles of a coherent cone system causing them to actually loose orientation and start to move in a different direction. This manipulation is from familiarity of the mass vibration at the atomic level, where mind can manipulate it most easily.

As we can learn to create elements of matter in a Joe Cell it becomes self evident the human body mind system is powerful enough to manipulate this level of matter.

The exercises and Lesson I have laid out, are the fastest way to get there if that is your goal. They represent many years of working with these fields we may call chi, and also connecting them with the sciences, of nuclear mass vibration and actual calculations that work in devices.

I do not see any real shortcuts to developing the feel felt ability, but I do believe anyone can achieve it if that is the strong desire.
We all have the necessary hardware inside our body to do this. The devices teach us how to find it.

The mass in every atom of the body is already spinning, we only need find it and begin to align it into a coherent field to do these feats of what appear as magic.

As with anything else like swimming, once the body has learned how it works, it can then start to happen instantly as we need it to work.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Striking

Obviously if we align our atoms in our arm correctly the effort of a punch is reduced almost to zero.

If at the point of impact we then send a cone spreading outwards through the body of the opponent, they will go flying backwards away from us much faster, as if being pulled backwards. The masters practiced this so much they can deliver the punch without using the arm.

The cone field can also be used to pull them sideways so they miss hitting you totally, or it can pull them down at any angle you project.
Watching a chi master do this is amazing, and trying to attack is also as amazing. Much like with party levitation, it seems there is nothing one can do to alter this effect, unless they also can counter it.

From what I have experienced I know levitation is possible. However I also know there is a science involved that can duplicate it.
When we achieve it in a device, the body will then learn how to do it without the device.
A working device can then be used to teach the body much faster.

Dave L

   
Group: Experimentalist
Hero Member
*****

Posts: 1380
Copper induction versus magnetic opposition.

If we set up two magnet such that they push apart, we can create a magnetic bearing, and there will be no friction between the two magnets.
There will be no inertial coupling, if we spin up one of the magnets the other floating on top of it will not spin up at all.
This is the action of the electron shell of magnetic elements like Iron, and Nickel. They have an extra Electron shell hook that becomes polarized as a magnet.

If we now spin up a copper cylinder, and bring a magnet up to it, we also feel the repulsion of the magnet from the copper in motion, but there is now a second force at 90 degrees that appears and it wants to pull the magnet along with the copper in the same direction of rotation.
This force is more powerful then the magnets in repulsion, as it can hurl the magnet across the room. This is also then a transfer of torsion or inertia from the copper in motion into the magnet that enters its motional field.

The copper has a nuclear hook, not an electron shell hook. This is a nuclear energy. It is 137 times stronger then a magnetic field can become according to physics.

It has been stated this force is a result of Eddy currents in the copper at the electron shell level, which is not true. There is no magnetic field generated in the copper cylinder that opposes the magnetic flux passing through it. Copper is not magnetic on the electron shell.

Once we realize that copper is Nuclear, and not Electron shell polarized, we can now move into the realm of Mass Vibration, and the pressure wave, to study how to better manipulate it.

When electric fields move through copper they attach to the nuclear mass and cause it to spin up. This is why we can get motional jumps and mass acceleration happening with copper lines during fast transitions of currents. The copper responds by generating motions.

As we accelerate a mass in space, there is a dragging force that resists the change of velocity. In copper we can manipulate this force, and change it's inertial qualities. Electric field are only one method, mass vibration is the other method.
------------------------------------------------

The mass of the copper atom has two isotopes that spin along a system of dual cones. Two cones with tips touching at the center.
These resonant frequencies can be manipulated. However is we align all of them in the same spin plane, we can reduce the drag of inertia along the plane of spin like a frisbee. We can cause them all to go into perfect alignment using either a scalar coil, or by cutting the copper to a correct length.

If we cut the copper to a fractal of the sum of the height of the cones of both isotopes, the spin plane will turn 90 degrees to the coppers length.
If we cut the copper to a fractal of the sum of the base of the cones of both isotopes, the spin plane will turn 90 degrees and the coppers frisbee effect will be along it's length.

We can actually do this using very low energy by placing a scalar coil on the copper and using an F gen to shift the angle of the dual cone spin planes.
This is method of inertial reduction, that is now directional. Specific frequencies can be used to manipulate the angle of the mass spin plane to any angle we would choose using a geometry vector to set up the alignment.

How do you think a saucer craft can do a 90 degree turn??? With no inertial drag.

In normal matter the spin planes are oriented in random angles so there is inertial resistance in all directions of motion.

This was shown by David Hammel in his work, and it does work.
---------------------------------------------------------------------------

Now if we want to create lift, as David Hammel did, we have to align the spin planes of two sides of an object to taper, so the spin planes will diverge on one side and converge on the other. He did this using an Aluminum cone system with the tips all pointing down.

The spin planes all aligned, they tilt outwards to the top, and we get lift.

Nuclear mass manipulation.

Dave L

Very interesting post!

Regards,
Pm
   
Group: Moderator
Full Member
*****

Posts: 107
How is geometry the solution to Energy extraction from the Quantum Field Fabric?

Number one is to locate a Source Frequency.

It is a waste of time, if we consider how impossible it is to take chaos, and extract energy from it.
Chaos is dissipation, it is entropy. It has lost it's harmonic field coherence.
This is the first pitfall of seeking free energy. Lets see if we can take all that chaos and cause it to reorganize itself?

The unaware person builds a little diode project, that lights an led, and when we track down the source of this energy, we discover the Radio station 5 blocks away, generating a constant carrier signal, and while he believes he has mastered energy from the chaos in the background field, with our spectrum analyzers we show him he was using a little too much imagination, with a lot of good intention.

The energy running that LED is not chaotic, it is very constant and being produced by something built by humans and organized using power from a constant frequency power grid.

--------------------------

The next step is to come to the earth shaking realization, that what we are was constructed by an intelligence, we are not yet aware of.
The Quantum Field Fabric is the canvas, and it is repainted extremely fast in real time.
Similar to the radio station down the street, there is a basic carrier frequency at the root of all the power and all the forms that exist.

Granted this is an extreme mental hurdle for many people, whom want to believe in other imaginary explanations, and would choose to ignore.
As where we exist in the reality with our eyes pointing outwards what we often see is the reverse of creation of the organizing force, the side of dissipation. We are looking out at the radiance in the universe, as it expands and dissipates, and seems to wind down.

It is a little harder to observe what lies under it, and causes it to continue to move with relentless power, as eventually we come to realize nothing is stationary, and nothing ever stops moving. As we look out there to larger dimensions, and as we look inwards to smaller dimensions, we discover that everything is always in motion and change is the only things that never seems to end. It is only where our perception is planted, we can observe relative stability and what we may feel is a stationary position in this universe.

------------------------------------------

In this universe there is a constant clock that moves serially to every position within it, and that is the only way everything inside it could agree, they exist in the same reality. The experiencers, seeking the "oneness of existence" can sense this, and even slide with it to scan any location because no location is truly remote, as it is scanning consciously by the one operator of the universe.

In order for us to discover a Quantum field frequency, we must accept the universe is not infinite, and cannot be infinite. There are no random events happening at the base frequency that sustains all form and frequency of the structure that is constructed from it. If this base frequency was not present, there could be no atoms, molecules, chemistry, as we perceive it to work. Because the instruments they use to detect these things are what is intermittent, they come to believe what is there is also intermittent.

The presence of an atom is more persistent, then the radio station down the streets carrier frequency, as sometimes when the power goes out, that radio station shuts down, and the young experimenters project goes dead.
However our bodies never seem to go dead, as the presence of our being, at least seems to be very reliable.

For us to have a consistent frequency that operates our table of the elements, there must be a motional resonance with a containment and a power source. We cannot have a resonance without a finite containment for energy to oscillate between.

People can get lost in the concept of infinity, but it cannot exist and does not exist, for there is both a highest frequency possible, and a lowest frequency possible, and each will cover a finite distance of oscillation in order to exist in the forms we observe do in fact exist.

Our mathematics can create infinite fractures in segments of these, and they can reach across vast distances, and they can be used to tap into other levels of resonance we do not normally see which are microscopic, but there is an end point where they do stop working.
These numbers are hard to fathom, as they go from such small dimensions, to such large ones, beyond our normal grasp of observation. But they do exist, and must exist in order to produce the world we can see and measure, which appears to be very real to us.

Does the picture on the computer monitor become aware of the pixels that make it up? I would say no, that picture does not seems to have awareness as we would think of awareness.

-----------------------------------------------------
Once we make the mental hurdle to accept there is a limit to the dimension of our reality and they must be finite in dimension at both the smallest and largest level for things to operate with a communal time present we can all agree on, which we can all become aware of, we can then progress to find the stability of the carrier wave that is constantly creating and sustaining everything in our reality.

We have now caught up to Max Plancks endeavor to locate the place where all we can observe converges into one base thing that must be present.
A single vibration frequency which exists everywhere, and powers everything.

-----------------------------------------------------
How can we test what Planck recorded, to see if it is true? Is it real?

What is a geometric Octave?
A linear octave is 2 time the frequency.
An area octave is 4 times the frequency.
A volumetric octave is 8 times the frequency.

If there is a base frequency present operating the universe, if we find it or an octave of it, we should find a stable source of power that never stops oscillating.

If we set up a finite distance in space for it to come up inside of and begin to oscillate, then we have found our power source from the Quantum Field Fabric.

How could we even recognize this form of energy, as empty space does not appear to be electrical in nature?
What would be the form of this energy, and how could we measure it or detect it?

Well pondering this for a time it should become self evident, that if we have found this universal clock that runs everything, we should be able to manipulate it into any form of energy or matter, using the correct methods that nature uses to do this.

Thus far this has been a thought experiment, in order to decide what we need to look to observe, to find this solution, that is the very basic level of our reality as we can perceive it.

The beauty is that if we do find it, we will have discovered unlimited energy from the Quantum Field Fabric.
This would be the most important discovery of our civilization, for the public to realize.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Motion is Universal

As we examine our universe from very tiny to very large the one thing that is a constant at every level is motion.

While it may not be our first choice to label this a "field force" in itself, motion is at least present everywhere, and we may start there then build on this to come to a comprehension in the correct order of the structure of the fields we can manipulate.

If motion is present within the universe, then it must be present in the Quantum Field Fabric of the universe, or it could not manifest from it.
On the computer monitor while the pixels seems to be fixed or motionless, they do have the motion of changing colors at very high rates of speed.
Within these fixed locations, each one has motion within it, to change its state of energy or frequency.

Thus with a grid or matrix system, we can have one field everywhere that operates consistently everywhere.
As we explore the universe using our developing technologies, we must take note of what is consistent everywhere, and realize for that to be true, there must be an underlying system of creating and sustaining it. A matrix of the field throughout all space that allows a hydrogen atom to operate consistently everywhere within it, as we observe is the reality.

So how does this Hydrogen atom that operates exactly the same everywhere, get its energy from a stationary matrix system that does not seem to move externally? How can a fixed systems of power, continue to power an object that is moving through it?

Max hands us a solution in his calculations, that suggest for any physical length, there is an underlying Quantum frequency that must be present within it. For any Area, there must be a Quantum frequency that sustains it, and for any volume there is then also a Quantum frequency.

This means there is a Quantum level of power present in the stationary field, and it grows geometrically, and as it grows geometrically the frequency increases. As there is more energy in a higher frequency.

It is important to realize this works opposite of our current electrical and antenna calculations. The Field is a Source of energy, and an antenna is a load on EM. These must not be confused, because they work oppositely.

Greater Line, Area, Volume in motional resonance with the Field Fabric is higher frequency.

Comprehension of this , will allow one to grasp the calculations being offered. They do not match EM technology which is the dissipation of the energy outwards to the state of chaos.

Where we start to match the two levels of our reality to hit the same frequency, is a unique thing, and it does not happen often at our level of dimension. We can however calculate where it does happen and cause it to happen.

Understanding Frequency

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
So how does this Hydrogen atom that operates exactly the same everywhere, get its energy from a stationary matrix system that does not seem to move externally? How can a fixed systems of power, continue to power an object that is moving through it?


The length of a line is a frequency.

The Field Holds specific frequencies that do not move. We can tap in at octaves of it at any dimension.

The curved line cannot sync with the field, but the area of a circle can.
If we solve for the diameter of a circle with the same area as the Quantum Field Fabric Square matrix, which lines form squares, we can get a vibration resonance with it, but the outer boundary of the form will not be in sync, it must rotate to establish a sync.

We have now derived a circular area 2D form from the stationary Field and it can move about to any point in the grid and obtain energy from it to self sustain. Further it will spin up at some frequency separating it from the Matrix frequency that is present everywhere.

That is how it works in direct experiments.

Geometry is used to create the first spinning fields of energy.

If we set up a gap between two flat surfaces to match this new frequency, it will come up in the gap as a circle with a boundary that is constant.
The only way this can be ciphered is to realize that every length in space has a frequency of energy within it.

The first calculation relies on the experiment which made the connection between these, 1 mm = 1 khz.

This is the equation that allows us to know the field dimensions of a field before we bring it up from the Quantum Level.


I have no need to prove this to anyone, it will in fact prove itself in experiment as it did for me, and now I can keep my fields from destroying other electronic equipment in the work area.

Experimenters make the mistake of believing if they just get enough EM power moving around it will take off with a free energy component.
Would one go out to hunt ducks using a cannon, no it is about hitting the correct frequencies accurately.


Dave L







   
Group: Moderator
Full Member
*****

Posts: 107
Cones

11-28-21

From the Quantum Field Fabric we can raise up any form if we can determine how it powers from that field.
Cones were the most difficult to cipher. But in this it was finally ciphered how to raise up conical fields that have an EM component.

There is a level of danger here, as consider a self sustaining form of energy powering itself from the Field Fabric that can now shock you, and never stop shocking you until you can shut it off.

So we back up one step to realize we can bring up cones that do not have an EM component inside them, and study those instead, before doing the nasty thing adding the EM component.

The first level of conical form discovery was using the NMR tables and guessing at the field fabric power frequency. When we used the 333 Mhz frequency, we got forms that manifested, but they could not power the H1 atom as a dual cone system also as that was the frequency we used as the input and not realizing how to convert it to a dual cone system accurately as of yet. It came out stationary as a matrix grid. But it did hand us a table of elements that worked on every other element except the H1 atom.

From this we then discovered, the cones power from the lateral surface area, and not the height which is the frequency of the NMR table.
We could now couple the Field Fabric into the lateral surface area of the dual cones, and then extract the height of the cones for the H1 atom, and now generate a full dual cone system for every atom on the table of NMR capable atoms.

Each discovery took us closer to a working system with EM present also on it. The most dangerous forms, power without end.

The latest form or flow, if you will, to construct an H1 atom from the Planck Length fractal octave stack, and then use that cone height to program the NMR charts. Out comes cones with an EM component, and on first pulling one of these up, the energy scared me. Do I have this in me still at my age now, to deal with this? Now that the methods are discovered and shown to work.

I labeled this "Top Secret" but left it posted publicly for unknown reasons that felt right at the time.
Is there a person out there whom will reach a level of comprehension, and take this information that works and develop it further?

That is up to the Great Spirit that we all end up bowing to in the end I suppose.

The info is there however with accurate data of frequencies and formulas, to duplicate these effects consistently.

Conical Tensor Field Manifestation Menu

Dave L
« Last Edit: 2021-11-28, 22:41:24 by DaveL »
   
Group: Moderator
Full Member
*****

Posts: 107
How much is known?

The Planck Length spreadsheet in the last Top Secret document works.
It creates forms that are fully filled with energy at every part of the field, unlike some that produce rings with little energy inside them as the area.

These Planck Length fractals, are more powerful and to a level that is almost scary when they become functional.

I do not know if anything smaller actually exists, I just know that these are the strongest ones yet in this progression of experiment.
As I recall they are rooted in a dimension that is 10E13 or more smaller then atoms. And it appears to be a real source of energy, which is present everywhere.

----------------------------------------------------

Now one would think the professed experts or leaders of the free energy movement would have some interest in these repeatable results...

The fact that I can not even find a way to communicate with any of them, shows involvement of the "Grey ones" to limit this knowledge.

It is one thing to claim a desire for this to be real, it is a totally different thing to be actually ready for it to manifest in your space.
Power from the same space that feeds our physical bodies atoms.
The experience at first may be overwhelming and the realization, that if I am inside the field, I am now a part of my own experiment, as in a saucer craft, this is a reality.

Effects on the physical body are real and they can alter our perception radically also.

Thus to get to this point of comprehension, we have to move through the experiences one at a time, to even accept it is real, and not magic of an evil nature, which is generally the first emotional reaction to it.

-----------------------------------------------

How much is known?

If I can cipher this stuff to a level of working systems in about 15 to 20 years, then it is very likely a secret group can do it in far less time, and it is practical to assume they probably have by now, since this work began back in the late 40's. The Planck length was known well back then in higher learning, and that was why people like Walter Russell and Wilbert Smith could make things that also worked, and we have no concept of why they worked today. The physics was watered down to only accept what produced EM outputs that can be read on meters and scopes.

The problem with todays approach, is they do not accept anything as real if it does not have an EM signal that can be read on a meter, with no human perceptions in between.

EM meters do not register motion.

EM is only one form of motion that can be extracted from the Quantum Field Fabric, and although I have managed to cipher one that does produce EM, that does not mean there are not others.

The work must continue with people whom can reach a level of "comprehension."
People aligned with the intention of creation over destruction that can qualify and be allowed to reach comprehension.

They cannot allow a civilization that practices war, to obtain these secrets to a level of practical use.
We would then become a danger to the rest of the universe.

To my knowledge this is the truth. It is a depressing thing to have to accept, as when I became ready for this, the world was still at war, and it still appears to be.

Most all of the people whom have reached this comprehension, as with me, have indicated there is a Spirituality, or at least a higher moral ethic involved in these discoveries to the point of making them practical. If what I write is incomprehensible, then the one reading it, is not ready to make this jump to creation over destruction, as a reaction. There is no way to cheat that test.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
The fear of creating a self powering field force.

Everyone wants free energy in the form of our present power grid. EM is our God, and while it is not a self sustaining form of energy, it is what is sought first, because we know there is useful power at the load end of a powering circuit.

One seeking free energy often does not think or ponder what will happen when they discover it, and then a tremendous fear comes with it, when it is only then realized one must be able to control it once achieved.

The first thing hit on, will teach the most, as to both power and fear of the power. It is the phi function. The runaway condition.

Vibrational phi ratios, the most dangerous, and the least understood.

Controlling a phi ratio expansion of energy, is at first very confusing, and at setting up the first one successfully we quickly realize the mistaken notion that it will somehow control itself. It will not, there is no harmony repetition in a phi release of energy that self powers. It continues to grow incessantly without an outer boundary to contain it, or release it's constant energy in a controlled way.

Some believe if they simply place a load on it they can keep up with the expansion and harness its power without loosing control, this is not true.
The levels of uncontrolled expansion are exponential.

One of the steps of realizing this is to create one and have it expanding without limits, to scare you a good one, and make you realize, what you are playing with can become dangerous.

In order to control the phi expansion of power, there must be a tempered release into the power of spin, a pi/2 harmony state set up to control it as an outer boundary of never ending spin motion at one distance out from center.

Developing a perfect phi ratio using resonant vibration techniques can cause trees to be pulled over and even uprooted.
No EM used in this at all.  Finding a frequency that resonates in wood, then adding to it a perfect phi secondary vibration sets up a self sustaining field in the wood that will eventually build up to it's structural destruction. I did not share these records of frequencies for the public to go around using to destroy trees for malicious reasons of emotion and hate. Two carefully and accurately placed wires into the side of a tree trunk can eventually topple that tree over with an almost explosive result.

If your sensitivity is good enough to locate a resonance in wood, that appears in all wood, then you can receive this knowledge on your own, and record your own frequencies. Most whom have will not share that data with anyone. The ability to sense how this works comes along with the responsibility built in, you will not be allowed to master this until you are trusted by your own astral body, to use it with control and responsibility.

The mysterious phi function claimed to be perfect harmony is a lie. Phi is the most destructive of uncontrolled function that exists to my knowledge.

If we in fact measure the conch shell or the spiral shells rings we then actually compare these ratios of measurement to phi we come to realize they are not perfect phi ratios at all, they are closer to pi/2 ratios that create the stability of the circle.

There are in fact a number of SSF fields possible ranging between the two values of perfect phi and pi/2, as well moving to 1.666666... that will create self sustaining forms of energy of motion, [vibration] and have nothing to do with EM per say as a field force. They create and regulate pressure waves, of various sorts, that will self sustain once set into motion.

Motion => Tempic Field Force

Wilbert Smiths terminology, and as well Tesla avoided using the word time, and differed to motion.

Time gives an unreal concept that everything operates on the same pulsing rate, and this is not true at our level of dimension.

Many levels of time, or tempic field fabric pulsing rates are possible, and with each one the physics of the universe may be altered differently.

It is our conscious state synchronized to a correct frequency that holds us into one reality we can all share, and see as the same perception experience.
The human brain can reach through the 3rd density range and slightly into 4th with some pain involved as tension in the brain. However most accurate scanning will access the other levels from a lower octave frequency that simply sends the energy down wards in frequency for us to observe.

Accuracy is possible, if we can slide our brain frequency to the correct lower fractal octave to observe the higher octaves of the other levels or reality that exist on top of this one, and or below it as well.

Accuracy is learned from experiencing it, and one of the fastest ways is to learn to feel and identify the elements of the table of elements that are consistently vibrating already everywhere. When one can get accuracy in this, they may then be ready to start scanning the 4th density and bring back real data that is accurate at distance, or of the higher nature of the 4th density science as well.

Identifiction of Elements

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Spin is an acceleration - phi is also an acceleration

One of the reasons that a phi can be contained with a spin motion, is that when a mass is moving at constant velocity in a circle, it is considered to be accelerating. The reason is that every time the motion is turned by 90 degrees the vector force of the original direction is totally cancelled and replaced with a new one at 90 degrees to the original. That is it takes a constant power to make a mass move into a circular orbit. This is enough to contain the acceleration of the inwards phi function if the two are balanced against one another.

We can thus temper the phi function using the pi/2 that represents the ratio of 1/2 the circumference against the diameter of the circle.
We then end up with field that stops expanding and yet continues to self power with quite a bit of energy present within it.

Machines

Here is shown that if we set the two ratios against one another, we get very tight close rings of energy that will fill a house.
This indicates a lot of power in this kind of field.

Dave L
   

Group: Professor
Hero Member
*****

Posts: 2602
Very interesting post!
Regards,
Pm
Sometimes I feel guilty for not doing these wondrous experiments that he is proposing.
Why aren't we  ?
   
Group: Elite Experimentalist
Full Member
***

Posts: 247
Sometimes I feel guilty for not doing these wondrous experiments that he is proposing.
Why aren't we  ?

Because we need to leave all of our so called learning and start again .

I have experienced this entirely by accident and I felt like i was insane ..hey maybe I am .
It is a different world and quite possibly this technology was around in ancient Egypt .
It cant hurt to see if you are "sensitive"
Chasing lightning is fun too .
   
Group: Experimentalist
Hero Member
*****

Posts: 1380
Sometimes I feel guilty for not doing these wondrous experiments that he is proposing.
Why aren't we  ?

Good question!

If you are not familiar with Dave's spinning copper experiments, I would recommend giving it a look at-

http://www.resonantfractals.org/Doc/Magnetism/SpinningCylinder.htm

regards,
Pm
   

Group: Professor
Hero Member
*****

Posts: 2602
Good question!
If you are not familiar with Dave's spinning copper experiments, I would recommend giving it a look at-
http://www.resonantfractals.org/Doc/Magnetism/SpinningCylinder.htm
I did but these particular experiments did not pique my interest because superconductors and good conductors subjected to fast dΦ/dt, are well documented to preserve the magnetic flux through them and on their other (far) side, without any pole reversal there.  There is severe flux bending on the near side, though.
Even incomplete shields like hollow rings preserve the flux on their far side except for small flux distortion in the immediate proximity of the conductor.  See:

https://youtu.be/c3kxyqbsERI
https://youtu.be/bHVvMFVIaFY

In the end, the total flux encompassed (∮) by an ideal shorted superconducting loop, is preserved in all cases. 
Good conductors subjected to fast dΦ/dt approach this behavior.

DaveL has proposed other experiments which are characterized by a low yawn factor, though.
   
Newbie
*

Posts: 38
Hi DaveL.  All of this is very interesting.  I have two questions.

If two phi ratio rectangles are placed together, with a parabola drawn from the top corners down to the bottom, would this shape produce the phi expansion?  Would a pulse gain energy as it travels upwards through such a parabola made of, for instance, a thin layer of charcoal?

Jerry
   

Group: Professor
Hero Member
*****

Posts: 2602
Would a pulse gain energy as it travels upwards through such a parabola ...
Pulse of what ?
   
Newbie
*

Posts: 38
Pulse of what ?

Electrical potential.
   
Group: Moderator
Full Member
*****

Posts: 107
Hi DaveL.  All of this is very interesting.  I have two questions.

If two phi ratio rectangles are placed together, with a parabola drawn from the top corners down to the bottom, would this shape produce the phi expansion?  Would a pulse gain energy as it travels upwards through such a parabola made of, for instance, a thin layer of charcoal?

Jerry

To amplify an electric field, we have to locate the vector of the tempic field inside it and amplify that using a vibrational force from the field fabric or any other Vibration source. If we double the T field at 90 degrees to the E field there is a 4x voltage gain [area] and actual power is added. Remember the power lies in quadrature with the E and B field vectors. Vibration is the power of motion. Only vibration fields can be easily set up to self sustain using infinite ratio fracturing.

Your model is interesting however, and I have never attempted something like that. A parabolic shape setting between two plates with phi ratio sides.
You could couple the energy to the copper isotope frequency and the phi fracture will probably drive you out of the room! LOL!

What I am attempting to relate is how to work with this new energy form, calculate it for yourself, and then you will see intuitively what to try in experiments. When you get the numbers right it will do something real.

Nissam Haramien came up with some of this in the early days, but got sidetracked with tetrahedrons, and now makes a Arc Crystal device, and is attempting to make plants grow better. When in reality to make plants grow better all one needs is to add some CO2 to the atmosphere.

Over the past 2 million years the CO2 levels have been dropping in our atmosphere, when they hit critical level all the green plants will die.
After that all the animals that breath O2 will be next, and as usual the Green New Deal is all totally backwards from reality.
Much of the carbon that forms our biological life forms comes right out of the air. If we interrupt that cycle, all biological life will start to die.
The critical elements of life are CHON.

Anyone who jumps on the CO2 reduction bandwagon is pretty ignorant of real science, in my humble opinion.

Anyway I did do one document based on EM as the goal, and in there are likely some experiments pointed to that may assist our learning.

Application menu

First one effects gravity, and uses only vibration tools, second one is about EM, Floyd Sweets work, and the E/P ratio as well, etc.

Remember that E field is the area of a spinning circle in 2 dimensions. B field is a volume with far less effective distance.
T field falls off linearly with distance and is the longest range field force, with the power to alter gravity.
For them to couple, geometry is definitely involved, and the geometry hands us the calculations that work.

An understanding of these concepts, and the methods of calculation, are what will change from tweaks, that happen to work, to realizing where the power actually comes from when we get it right.

To get the mind to understand, that the power is in the vibration frequency spectrum, and it comes from the energy that powers atoms, and develops the strong force in atoms. That is the source of free energy, as it is already everywhere, and cannot be metered. LOL!

The fastest way to reach comprehension, is to make one of these Self Sustaining fields, and stand inside it. At that point no more faith is required, you will know. It will then shift your awareness to a new level of energy, that can deliver forever. This process took me 20 years to find, and then begin to quantify and measure.

The basic Quantum level forms:

Line, Area of circles, volume of spheres, and finally the Isotope cones.

These can be raised directly from the Field Fabric, when we know the correct frequencies.

Everyone at present imagines the Quantum Field Fabric contains EM at it's base level, but that is an error. EM is a higher level of from.

When I measured the Planck Length and then brought it up using the fractal geometric methods of Walter Russell, I was surprised to discover it contains both 90 degree  quadrature angles, and 45 degree ones. This does have direct application to EM, as the power of an AC field is the product of two sine waves at 90 degrees, voltage and current, in real time and the power appears where the product of the two is greatest, right about at 45 degrees setting between them in real time, as the field rotates in the copper wire.

If we access the T field vector that is the one we can add energy to from any identified source.
Application of a phi ratio will then create a runaway condition, but if tempered with pi/2 will then contain it and make it safe to work with.

You are now asking the right questions however, and that is a definite inspiration for me.
----------------------------------------------------------------------------------------------------

Down under, Joe was tweaking up drag racers, and got them to accelerate so fast he could not find a diver that would run them in a race.
The limit of a normal car, no matter the power of the engine is 2 seconds to go from 0 to 60, and the weak point is the friction between the tires and the road. That is unless you reduce the inertial connection to the earths gravity field! Kind of funny how this scared people when they observed it down there. Joe is a major "tweaker" and can not explain even electric circuits, let alone mass vibration and inertial coupling. But he gets it to work.

It take a really opened mind, and also witnessing this stuff first hand, to really make progress.

I have attempted to make an introduction path, for others to witness it working in various ways. To greatly simplify trying to work your way through the years of documents and experiments, and I added the methods to measure it right up front on the first Lesson.

Jumping in at the level of EM, may be more difficult for sure, but then everyone is different.
The first thing is personal proof. Is this energy real, can it be set up to self sustain with power present? Is the power real? What is the Source? Can it form geometric self powering forms of energy?

And lastly, do not show a working device powering your home! Keep it small at first in the public domain.

Dave L
   
Group: Moderator
Full Member
*****

Posts: 107
Self Powering energy fields

I was corrected lately as to what is "self powering." I was challenged that nothing can power itself.

This is correct in that any form of energy has a source of power. However when we set up a field bubble in an empty location of space, and it seems to power itself, as an atom does, as far as we are concerned it does power itself. It does this by drawing its own energy from the Quantum Field Fabric, and thus we do not have to feed it any power using normal entropic means.

"Self Powering" is thus a short hand term, meaning we do not have to worry about powering it, it will draw the energy for itself in order to self sustain both it's form and frequency.

With any depth of physics at the QED level, this should become self evident, however the way it is taught certainly hides this fact.
The concept of entropy is so focused on, it is glossed over in all the physics and even the NMR study to a great degree.
With that background however, if we only add a few things, we can then grasp how self powering works from a Quantum Field Fabric that is filled with energy.

Consider the strong force of all atoms, and the power that is there within it to hold the atoms together, it is self evident, the Field Fabric can hold within it great levels of power. We only need to understand how to access it correctly. As Tesla indicated it is all about accurate frequency.

At the quantum level, a frequency can be set equal to a length in space, and a length in space can be set to a frequency that is equivalent in energy.

As well an area has a frequency in the Quantum Field Fabric, and this can also be calculated.

As well a volume of space has a frequency.

We can thus couple elements of vibration to one another using equivalence of frequency, frequency is everything.

Dave L

   
Pages: 1 2 [3] 4
« previous next »


 

Home Help Search Login Register
Theme © PopularFX | Based on PFX Ideas! | Scripts from iScript4u 2021-12-07, 21:55:03