I saw a few days video which I think present one of the simplest free energy device and IMHO it's real. The only thing which is missing is tank circuit on primary powered by any electronic resonant circuit. Primary must be high Q to get high COP at output:
https://www.youtube.com/watch?v=xmy-QuaXQjY&t=140s
It uses this Chinese miracle.  Even if you somehow learn the output voltage, frequency and current of this module, replicating that 12x8cm transformer-capacitor only with information about its wire gauges, is a shot in the dark.  Transformer-capacitor with 3 windings.A similarly wound transformer-capacitor also appears in this article. Also, that light bulb is not a resistive incandescent type like the symbol on the schematic implies. The accompanying text on the schematic clarifies this. In the video, it appears as a cracked standard LED bulb tailored for a 240VAC mains supply, but the physics of LEDs requires them to be supplied with a much lower voltage ...and DC or PDC. To satisfy this requirement, that LED light bulb must have some kind of 240VAC to low-voltage DC converter built-in. This converter will have a profound impact on the current flowing in the primary winding of the transformer-capacitor since that LED bulb is connected in series with it. In the simplest case, the converter is constructed as a simple capacitive divider with a rectifier. In more complex solutions, the 240VAC is first rectified and then applied to a high-frequency buck-converter. In the highest quality LED bulbs, an additional high-frequency PFC stage precedes the buck converter. The first case severely distorts the current waveform coming out of the Chinese HV module and the two latter solutions modulate the primary current of the transformer-capacitor with undetermined high frequency harmonics.
|
Author
Topic: Free energy is easy, ask an intelligent question... (Read 17189 times)
