PopularFX
Home Help Search Login Register
Welcome,Guest. Please login or register.
2019-06-19, 06:55:17
News: A feature is available which provides a place all members can chat, either publicly or privately.
There is also a "Shout" feature on each page. Only available to members.

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 [14]
Author Topic: The final answer...  (Read 49116 times)
Group: Elite
Hero Member
******

Posts: 3517
It's turtles all the way down
SM placed the amperage clamp meter in the center of the LTPU and the meter showed ac current. Electromagnetics at large.
Now imagine if you will (in my best Rod Serling voice), a large oscillating resonance between those two rings sliding back and forth, up and down the center modules. A magnetic gradient will be measured.

The clamp meter SM used (UEI DL235) was capable of reading DC static fields external to the device as well as AC. I purchased the identical unit and it has a zero button to null out the residual static earth magnetic field. The manual is attached that describes the use of the zero button, and you can see SM zero the meter using the button right before he waves it around the unit. So are you positively sure he was reading an external AC field? I would leave all options open until proof is given.

I also purchased the Extech Wattmeter DW6060 used by Dr. Schinzinger so that I might further understand if it's use as seen in the video is accurate. I also intend to purchase additional test equipment as seen in the videos, such as field search coil and field meter, also the EMI tester, DMM etc.

IMO No one I repeat no one yet has demonstrated a working stand alone TPU  similar in shape, size, simplicity and power output as SM has, so thus far it's all talk no action. Prove me wrong.


Regards
« Last Edit: 2019-05-16, 17:34:16 by ion »


---------------------------
"Secrecy, secret societies and secret groups have always been repugnant to a free and open society"......John F Kennedy
   

Group: Moderator
Hero Member
*****

Posts: 1452
Frequency equals matter...


Buy me a drink
The TV interference and the thumping advertise AC. Not dismissing D.C.


---------------------------
   

Sr. Member
****

Posts: 444
The clamp meter SM used (UEI DL235) was capable of reading DC static fields external to the device as well as AC. I purchased the identical unit and it has a zero button to null out the residual static earth magnetic field. The manual is attached that describes the use of the zero button, and you can see SM zero the meter using the button right before he waves it around the unit. So are you positively sure he was reading an external AC field? I would leave all options open until proof is given.

I also purchased the Extech Wattmeter DW6060 used by Dr. Schinzinger so that I might further understand if it's use as seen in the video is accurate. I also intend to purchase additional test equipment as seen in the videos, such as field search coil and field meter, also the EMI tester, DMM etc.

IMO No one I repeat no one yet has demonstrated a working stand alone TPU  similar in shape, size, simplicity and power output as SM has, so thus far it's all talk no action. Prove me wrong.


Regards

Hi Ion,
  The clamp on ammeter I used, and it too registered current around my TPU builds, was a d'arsonval mechanical movement an old Sperry Mod. SPR-300 and I really don't know how to explain it.  I can't get the meter to budge around any and all things I have waved it at, but stick it by a TPU of mine with a rotating field and it registers.  I thought a motor field would do the same trick but I don't get any movement around running motors either so I don't know what to say except that a working TPU must have a similar rotating field to what I have got going on in my builds. My builds are about the same size, shape and weight as S. Marks, and my meter is totally different then his but showed the same thing, with some tunings on my TPU I had readings just over 40 amps with 600 ma. input to the toroid.  I don't think S. Marks ever showed more then 2 amps. on his.

Respectfully
Room


---------------------------
"Whatever our resources of primary energy may be in the future, we must, to be rational, obtain it without consumption of any material"  Nicola Tesla

"When bad men combine, the good must associate; else they will fall one by one, an unpitied sacrifice in a contemptible struggle."  Edmund Burke
   

Group: Moderator
Hero Member
*****

Posts: 1452
Frequency equals matter...


Buy me a drink
And we notice here that there is an oscillatory harmonic in the midst of the resonant bouncing.
https://www.youtube.com/watch?v=8HVA00LnKBc
Heterodyning and eclipsing frequencies cause very high transients in space(EMPS).
This can be see as 'Action at a distance' in some surroundings.
A Tesla coil has EMPs inside the resonant magnetic field.
I post this extra because of his attention to magnetic detail:
https://www.youtube.com/watch?v=B015P0XFl9g
« Last Edit: 2019-05-17, 06:29:55 by giantkiller »


---------------------------
   
Sr. Member
****

Posts: 496
And we notice here that there is an oscillatory harmonic in the midst of the resonant bouncing.
https://www.youtube.com/watch?v=8HVA00LnKBc
Heterodyning and eclipsing frequencies cause very high transients in space(EMPS)

In this video, we see only permanent magnets subjected to the low frequency magnetic field of an electric magnet. It's very commonplace.




---------------------------
"Chance favours only the prepared mind."  Louis Pasteur
   
Newbie
*

Posts: 24
In this video, we see only permanent magnets subjected to the low frequency magnetic field of an electric magnet. It's very commonplace.

Here the full video of it.
https://youtu.be/HKoUd8l7yZE
   
Hero Member
*****

Posts: 3048
last I heard Marco was not well [end of last year

 in my last exchanges with him he mentioned quote " Waiting to Die" [from illness]

I did reach out again but got no response ,will try again in-case he is reading here.

always loved his thoughts and contributions.


Chetkremens@gmail.com

 
   

Full Member
***

Posts: 223
Here the full video of it.
https://youtu.be/HKoUd8l7yZE
I remember this vid.  The kick coil looks to be a toroid winding, probably orbo effect to drive it.  I wonder if there were many more magnets inline if the input would remain the same?

I remember a few vids some years ago that had 1 driver spinning a sphere mag and then setting small jars with sphere mags all around the driven sphere, and even setting up more jars, and more jars. And they were all spinning.

I think it was lidmotor that initialized that trend back then.

Mags
   

Group: Moderator
Hero Member
*****

Posts: 1452
Frequency equals matter...


Buy me a drink


---------------------------
   

Hero Member
*****

Posts: 2187
But the TPU uses ferrite cores in all models, even in the one that looks as though it does not, Peter found it, a small CMC which I have the same one. each coil has 29mH and if wired to buck together the inductance nearly cancels at 0.5mH, but wired so as not to buck the inductance is X4 at 116mH.

This seems to only happen when wound together on the same ferrite, but if they are an air coil the inductance only adds simply, X2, and not X4.

Now if you mix charge displacement current between two magnetic loops which have a capacitive connection, current can be induced into a voltage boost, overwound, scenario which is in phase with the boosted voltage, you don't need much if looped somehow as even at 50kHz the power will escalate out of control. (boost circuits and class E amplifiers are between 90-100% efficient) ;)

Regards

Mike 8)


---------------------------
"All truth passes through three stages. First, it is ridiculed, second it is violently opposed, and third, it is accepted as self-evident."
Arthur Schopenhauer, Philosopher, 1788-1860

As a general rule, the most successful person in life is the person that has the best information.
   
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 [14]
« previous next »


 

Home Help Search Login Register
Theme © PopularFX | Based on PFX Ideas! | Scripts from iScript4u 2019-06-19, 06:55:17