Kapanadze replication

Author Topic: Kapanadze replication (Read 290174 times)

Topic Options

Verpies

Re: Kapanadze replication « Reply #725 on: 2026-03-14, 14:44:27 »

Group: Administrator
Hero Member

Posts: 4856

Quote

But essentially, it's a relatively small, simplified Kapanadze transformer. The secret is the use of simple aluminum layers inside the coil body, 2 split foils, for both halves of the form, the lower end foil is hit with a certain Positive pulse train, the first winding is held Negative, while the upper foil becomes INTENSELY active, and having an output on the heavy winding. Not a primary to secondary induction, but a rapid changing of voltages between the upper and lower foils, with a 50 hz interruption circuit. Rather than having to move massive currents to induce an output... he is alternating Voltages instead. Bunk has a small transformer like this, doing 4 kw off the 9v. Must see.

What certain Positive pulse train ?

Magluvin	Re: Kapanadze replication « Reply #726 on: 2026-03-14, 19:44:29 »
Group: Mad Scientist Hero Member Posts: 1241	Quote from: Verpies on 2026-03-14, 14:44:27 What certain Positive pulse train ? what post did you quote from? hard to find, let alone we should not have to find it if you 'quoted' it properly..... anyway, my reaction to that quote, if it holds water... is this person implying that the alum foils induce the windings via E field from the foils? mags

gyula	Re: Kapanadze replication « Reply #727 on: 2026-03-14, 19:52:27 »
Group: Tech Wizard Hero Member Posts: 1385	Mags, here is the post the quote came from: https://www.beyondunity.org/thread/bunk-overunity-transformer-finally-schematic-and-replication-available/?p=1&order=all#comment-04130d6b-838e-4a7f-ac09-b40d00986133 see this device mentioned here too: https://groups.io/g/EVGRAY/message/25413 Gyula « Last Edit: 2026-03-14, 20:53:41 by gyula »

Magluvin	Re: Kapanadze replication « Reply #728 on: 2026-03-14, 20:40:32 »
Group: Mad Scientist Hero Member Posts: 1241	Thanks Gyula mags

Cheappower2012

Re: Kapanadze replication « Reply #729 on: 2026-03-14, 23:30:49 »

Group: Tinkerer
Full Member

Posts: 179

Well this guy shows no readings,we know the output of a kap device is 50hz,220vac.it can be used with a step down transformer.
No voltage,current or oscilloscope readings are shown, Its a magic show.For it be real it needs more detail as to construction, lots of readings[current,voltage and oscilloscope]to show it could be real. Because we live in an age of high energy batteries and A1
more proof is needed to determine fakes from real devices.

DELAMORTO	Re: Kapanadze replication « Reply #730 on: 2026-03-15, 05:46:30 »
Full Member Posts: 217	Bunky the Clown, are you seriously discussing his devices?! Бунк клоун, вы серьезно его девайсы обсуждаете?!

Chet K

Re: Kapanadze replication « Reply #731 on: 2026-03-15, 06:42:15 »

Group: Ambassador
Hero Member

Posts: 4748

It is odd to see links to Bunk's “work” posted here by worldcup...
I recall much drama at Stefan’s around these BUNK games/claims
( never any obvious value to those deep into Kapanadze Experimenting )

However …..
Maybe it’s good to double check ( have asked a few to look into it when they have time ).
I see the member Cheappower2012 also draws similar conclusions above.

Respectfully,
Chet K

« Last Edit: 2026-03-15, 07:49:07 by Chet K »

chief kolbacict	Re: Kapanadze replication « Reply #732 on: 2026-03-16, 15:14:28 »
Sr. Member Posts: 436	Quote from: DELAMORTO on 2026-03-15, 05:46:30 Bunky the Clown, are you seriously discussing his devices?! Бунк клоун, вы серьезно его девайсы обсуждаете?! Kapanadze replication overunity.com.png (447.85 kB, 560x315 - viewed 476 times.)

DELAMORTO

Re: Kapanadze replication « Reply #733 on: 2026-03-17, 19:00:00 »

Full Member

Posts: 217

I finally had a successful experiment! I combined high-frequency current with low-frequency voltage. My 15-20watt transformer lit a 40-watt lamp at full power. )))
This is just the beginning; there's still no grounding, which is necessary to precisely tune the high frequency to resonate with the load.
The puzzle is complete! I'm glad I'm starting to get something working. It may be a bit crooked, but the oscilloscope trace is now correct!

Video - https://dzen.ru/video/watch/69b9a229afa5fb38886dd5db
https://youtu.be/tj2s-oh1gM0

Kapanadze replication

vlcsnap-2026-03-17-22h02m14s012.png (904.95 kB, 1280x720 - viewed 454 times.)

Kapanadze replication

vlcsnap-2026-03-17-22h02m32s802.png (398.56 kB, 666x375 - viewed 421 times.)

« Last Edit: 2026-03-17, 22:01:22 by DELAMORTO »

DELAMORTO

Re: Kapanadze replication « Reply #734 on: 2026-03-17, 19:44:33 »

Full Member

Posts: 217

Как на зло интернет умер совсем...

Kapanadze replication

vlcsnap-2026-03-17-22h26m00s642.png (274.69 kB, 666x375 - viewed 415 times.)

Kapanadze replication

vlcsnap-2026-03-17-22h23m55s025.png (288.55 kB, 666x375 - viewed 398 times.)

Kapanadze replication

vlcsnap-2026-03-17-22h02m14s012.png (364.83 kB, 666x375 - viewed 53 times.)

Kapanadze replication

vlcsnap-2026-03-17-22h02m32s802.png (398.56 kB, 666x375 - viewed 49 times.)

« Last Edit: 2026-03-17, 20:45:47 by DELAMORTO »

DELAMORTO	Re: Kapanadze replication « Reply #735 on: 2026-03-17, 19:49:19 »
Full Member Posts: 217	Photo 1 - high-frequency current on the lamp Photo 2 - high-frequency current + low-frequency amplitude Photo 3 - lamp with high-frequency current Photo 4 - lamp high-frequency current + low-frequency amplitude

DELAMORTO	Re: Kapanadze replication « Reply #736 on: 2026-03-17, 19:51:21 »
Full Member Posts: 217	My transformer couldn't handle this lamp before, but now I lit it with overheating -260 volts! Kapanadze replication IMG_20260312_164527_976.jpg (63.75 kB, 683x365 - viewed 90 times.) Kapanadze replication vlcsnap-2026-03-17-22h02m32s802.png (398.56 kB, 666x375 - viewed 94 times.)

Frederik2k1	Re: Kapanadze replication « Reply #737 on: 2026-03-18, 07:02:13 »
Jr. Member Posts: 60	Quote from: DELAMORTO on 2026-03-17, 19:51:21 My transformer couldn't handle this lamp before, but now I lit it with overheating -260 volts! What is the build of the coil? Are you now testing the bunk configuration with the two layer aluminium foil ?

DELAMORTO

Re: Kapanadze replication « Reply #738 on: 2026-03-18, 07:22:16 »

Full Member

Posts: 217

The goal was to obtain high-frequency current from the oscillator(kacher), then add low-frequency voltage to this current.
The oscillator(kacher) is a standard one, with a direct pickup winding, no second tower, and no ground (which is bad).But at this stage it is acceptable.
I didn't just add up the powers, I made it 50Hz from a high frequency without diodes or anything else.
There's a video of the Tesla transformer's second tower melting nails...that's some serious current! I can cut it at 50 hertz.
The circuit itself is simple, requiring precise high-frequency tuning to the load.
Currently, there's no automatic resonance...or ground.

Kapanadze replication

капапнадзе.JPG (21.83 kB, 461x378 - viewed 114 times.)

« Last Edit: 2026-03-18, 08:42:01 by DELAMORTO »

Worldcup

Re: Kapanadze replication « Reply #739 on: 2026-03-18, 07:50:09 »

Newbie

Posts: 19

Quote from: DELAMORTO on 2026-03-18, 07:22:16

The goal was to obtain high-frequency current from the oscillator(kacher), then add low-frequency voltage to this current.
The oscillator(kacher) is a standard one, with a direct pickup winding, no second tower, and no ground (which is bad).But at this stage it is acceptable.
I didn't just add up the powers, I made it 50Hz from a high frequency without diodes or anything else.
There's a video of the Tesla transformer's second tower melting nails...that's some serious current! I can cut it at 50 hertz.
The circuit itself is simple, requiring precise high-frequency tuning to the load.
Currently, there's no automatic resonance...or ground.

Interesting.

From my personal collection: 'Bunk' ran the forum https://hhobro.forum2x2.ru/. He had a habit of resetting the forum daily and banning members at random.

I've been monitoring his official YouTube channel for years.

https://www.youtube.com/@missispots/videos

@DELAMORTO Are you now testing the bunk configuration with the two layer aluminum foil ?

https://www.youtube.com/@merlit1962/posts

Kapanadze replication

Foils.png (253.83 kB, 644x461 - viewed 127 times.)

« Last Edit: 2026-03-18, 08:53:58 by worldcup »

---------------------------

FE Seeker - IT/Coding/Soft/Cyber Security Expert

DELAMORTO	Re: Kapanadze replication « Reply #740 on: 2026-03-18, 08:17:07 »
Full Member Posts: 217	I know him as a clown, drawing stupid pictures, frequently changing his nicknames, and communicating with himself through them. I don't take him seriously at all, and I wish the same for you!

Frederik2k1

Re: Kapanadze replication « Reply #741 on: 2026-03-18, 10:25:29 »

Jr. Member

Posts: 60

Quote from: DELAMORTO on 2026-03-18, 07:22:16

The goal was to obtain high-frequency current from the oscillator(kacher), then add low-frequency voltage to this current.
The oscillator(kacher) is a standard one, with a direct pickup winding, no second tower, and no ground (which is bad).But at this stage it is acceptable.
I didn't just add up the powers, I made it 50Hz from a high frequency without diodes or anything else.
There's a video of the Tesla transformer's second tower melting nails...that's some serious current! I can cut it at 50 hertz.
The circuit itself is simple, requiring precise high-frequency tuning to the load.
Currently, there's no automatic resonance...or ground.

Quite interesting but it didn't answer my question.
I'm interested in how your coil is constructed and whether it resembles the Bunk configuration.
As you said in your last post that you do not take him seriously, I guess you are not testing the bunk claim of his simple setup ?!
Kind regards

DELAMORTO	Re: Kapanadze replication « Reply #742 on: 2026-03-18, 10:32:45 »
Full Member Posts: 217	The diagram doesn't really tell you anything... There are no linings, I won't even look at Bunka's diagrams. Не надо больше меня спрашивать о его обкладках

Verpies	Re: Kapanadze replication « Reply #743 on: 2026-03-18, 11:53:01 »
Group: Administrator Hero Member Posts: 4856	Quote from: worldcup on 2026-03-18, 07:50:09 Are you now testing the bunk configuration with the two layer aluminum foil ? Here is another (allegedly successful) design with aluminum foil split tube to tickle your fancy: https://youtu.be/6AojwY1z3sU?t=49

Worldcup	Re: Kapanadze replication « Reply #744 on: 2026-04-06, 06:37:52 »
Newbie Posts: 19	There's some successful test for BUNK configuration ongoing @ https://www.beyondunity.org/thread/bunk-overunity-transformer-finally-schematic-and-replication-available/?postbadges=true&p=11&order=all#comment-2744bca6-ad53-4104-931d-b424005abfd8 « Last Edit: 2026-04-06, 07:38:12 by worldcup » --------------------------- FE Seeker - IT/Coding/Soft/Cyber Security Expert

Thaelin	Re: Kapanadze replication « Reply #745 on: 2026-04-06, 10:49:11 »
Full Member Posts: 138	Just a heads up but I had to dump that site due to it pegging my 8 core processor every time. Seems it is trying to d/l or u/l something or. Not sure if any one else had this problem but.....

Thaelin	Re: Kapanadze replication « Reply #746 on: 2026-04-08, 07:51:56 »
Full Member Posts: 138	Quote from: Thaelin on 2026-04-06, 10:49:11 Just a heads up but I had to dump that site due to it pegging my 8 core processor every time. Seems it is trying to d/l or u/l something or. Not sure if any one else had this problem but..... Fighter ask for me to amend this with the fact it is just the water effect of the site. Not anything going on bad. When turned off all went back to norm. thay

andyw33

Re: Kapanadze replication « Reply #747 on: 2026-04-20, 21:59:42 »

Newbie

Posts: 13

Quote from: DELAMORTO on 2026-03-18, 07:22:16

The goal was to obtain high-frequency current from the oscillator(kacher), then add low-frequency voltage to this current.
The oscillator(kacher) is a standard one, with a direct pickup winding, no second tower, and no ground (which is bad).But at this stage it is acceptable.
I didn't just add up the powers, I made it 50Hz from a high frequency without diodes or anything else.
There's a video of the Tesla transformer's second tower melting nails...that's some serious current! I can cut it at 50 hertz.
The circuit itself is simple, requiring precise high-frequency tuning to the load.
Currently, there's no automatic resonance...or ground.

Hi Delamorto,
so you adjusted manually the frequency of Kacher to the load for particular value? When you change the bulb for different wattage, do you need to change the frequency?
A.

DELAMORTO	Re: Kapanadze replication « Reply #748 on: 2026-04-29, 13:35:27 »
Full Member Posts: 217	I was looking for a way to generate free current, not from a choke or a Tesla coil, but from a simpler method. Then I remembered my conversation with Gia...and it all came together with my first experiences when I sparked into the ground cable and looked at the hanging current clamp. Kapanadze replication CE генератор Капанадзе.JPG (12.38 kB, 251x289 - viewed 10 times.)

DELAMORTO	Re: Kapanadze replication « Reply #749 on: 2026-04-29, 13:39:25 »
Full Member Posts: 217	I understood how Kapanadze obtained current, and I already know how to cross current and voltage. https://www.youtube.com/watch?v=aoxnMv3XxNY The information we need comes immediately after the updates on Tariel's condition. I hope the YouTube subtitles will translate the conversation...